Crankshaft Pulley And Vibration Damper
Usage:
Remove Crankshaft Pulley And Vibration Damper
1. Loosen the pulley fastening bolt approximately 1/8 in. (0,31 mm).
2. Using tool (A) pull the pulley and vibration damper loose from the crankshaft.
3. Remove tool (A), pulley fastening bolt, and plate.
4. Remove crankshaft pulley and vibration damper (1)-weight 55 lbs. (25,0 kg).
Install Crankshaft Pulley And Vibration Damper
1. Install the vibration damper and crankshaft pulley, plate, and fastening bolt.
2. Tighten the fastening bolt (1) to 230 ± 20 lb.ft. (31,8 ± 2,8 mkg). Hit the fastening bolt with a hammer. Tighten the fastening bolt to 230 ± 20 lb.ft. (31,8 ± 2,8 mkg) again.
Caterpillar Information System:
G333C ENGINE Crankshaft Main Bearings
G333C ENGINE Connecting Rod Bearings
G333C ENGINE Oil Pan Plate
G333C ENGINE Oil Pump
G333C ENGINE Oil Pan
G333C ENGINE Engine Water Pump
G333C ENGINE Auxiliary Water Pump Drive
G333C ENGINE Auxiliary Water Pump
G333C ENGINE Oil Cooler And Filter Base
G333C ENGINE Governor Drive
G333C ENGINE Governor
G333C ENGINE Governor And Governor Drive
G333C ENGINE Crankshaft Front Seal
G333C ENGINE Timing Gear Cover
G333C ENGINE Magneto Drive
G333C ENGINE Camshaft
G333C ENGINE Timing Gears And Plate
G333C ENGINE Spark Plugs
G333C ENGINE Spark Plug Adapters
G333C ENGINE Differential Pressure Regulator
G333C ENGINE Air Cleaner Housing
G333C ENGINE Turbocharger
G333C ENGINE Exhaust Manifold
G333C ENGINE Carburetor