Spark Plug Adapters
Usage:
Remove Spark Plug Adapters
start by:
a) remove spark plugs
1. Remove the plug and let the water run out of the engine cooling system.
2. Remove the spark plug adapter, using tool (A).
Install Spark Plug Adapters
1. Install a new seal (2) and gasket (3) on the spark plug adapter (1). Put liquid soap on the seal and in the bore of the cylinder head. Put 9M3710 Anti-Seize Compound on the threads of the spark plug adapter.
2. Install the spark plug adapter, using tool (A). Tighten the adapter to 70 ± 5 lb.ft. (9,7 ± 0,7 mkg).
3. Fill the engine with coolant.
end by:
a) install spark plugs
Caterpillar Information System:
G333C ENGINE Spark Plugs
G333C ENGINE Timing Gears And Plate
G333C ENGINE Camshaft
G333C ENGINE Magneto Drive
G333C ENGINE Timing Gear Cover
G333C ENGINE Crankshaft Front Seal
G333C ENGINE Crankshaft Pulley And Vibration Damper
G333C ENGINE Crankshaft Main Bearings
G333C ENGINE Connecting Rod Bearings
G333C ENGINE Oil Pan Plate
G333C ENGINE Oil Pump
G333C ENGINE Oil Pan
G333C ENGINE Differential Pressure Regulator
G333C ENGINE Air Cleaner Housing
G333C ENGINE Turbocharger
G333C ENGINE Exhaust Manifold
G333C ENGINE Carburetor
G333C ENGINE Gas Pressure Regulator
G333C ENGINE Aftercooler
G333C ENGINE Water Temperature Regulator
G333C ENGINE Rocker Shaft Assembly And Push Rods
G333C ENGINE Cylinder Head Assembly
G333C ENGINE Valve Lifters
G333C ENGINE Valves