Oil Pan
Usage:
Remove Oil Pan
1. Remove the oil pan plug and let the oil run out. Capacity 7 U.S. Gal. (26 liter).
2. Remove the oil pan fastening bolts (1).
3. Remove the oil pan (2).
Install Oil Pan
1. Put the oil pan into position on the engine.
2. Install the oil pan fastening bolts.
3. Fill the engine with oil to the correct level. Check the oil level after starting engine.
Caterpillar Information System:
G333C ENGINE Engine Water Pump
G333C ENGINE Auxiliary Water Pump Drive
G333C ENGINE Auxiliary Water Pump
G333C ENGINE Oil Cooler And Filter Base
G333C ENGINE Governor Drive
G333C ENGINE Governor
G333C ENGINE Governor And Governor Drive
G333C ENGINE Magneto
SCSA SOLID STATE MAGNETO Pulser Coil Installation
SCSA SOLID STATE MAGNETO Storage Capacitor Installation
SCSA SOLID STATE MAGNETO Zener Diode Installation
SCSA SOLID STATE MAGNETO Power Board Installation
G333C ENGINE Oil Pump
G333C ENGINE Oil Pan Plate
G333C ENGINE Connecting Rod Bearings
G333C ENGINE Crankshaft Main Bearings
G333C ENGINE Crankshaft Pulley And Vibration Damper
G333C ENGINE Crankshaft Front Seal
G333C ENGINE Timing Gear Cover
G333C ENGINE Magneto Drive
G333C ENGINE Camshaft
G333C ENGINE Timing Gears And Plate
G333C ENGINE Spark Plugs
G333C ENGINE Spark Plug Adapters