Usage:
start by:
a) remove carburetor
1. Remove the pressure sensing line (4) for the gas pressure regulator.
2. Remove the support bracket (2) for the air inlet line.
3. Remove the fastening bolts for the instrument panel (1) and move the panel out of the way.
4. Remove the support bracket (3) for the gas pressure regulator.
5. Remove the vent line (5).
6. Remove the aftercooler cover (7).
7. Remove the aftercooler (6).
Install Aftercooler
1. Put the aftercooler (1) into position on the engine and install the cover (2).
2. Install the vent line.
3. Install the support bracket and gas pressure regulator.
4. Put the instrument panel into position and install the fastening bolts.
5. Install the support bracket for the air inlet line.
6. Install the pressure sensing line for the gas pressure regulator.
end by:
a) install carburetor