Valve Lifters
Usage:
Remove Valve Lifters
start by:
a) remove cylinder head assembly
1. Remove the valve lifter (1) from the engine, using tool (A).
Install Valve Lifters
1. Clean the valve lifters and put SAE 30 oil on them.
2. Install the valve lifters in the engine, using tool (A).
end by:
a) install cylinder head assembly
Caterpillar Information System:
G333C ENGINE Cylinder Head Assembly
G333C ENGINE Rocker Shaft Assembly And Push Rods
G333C ENGINE Water Temperature Regulator
G333C ENGINE Aftercooler
G333C ENGINE Gas Pressure Regulator
G333C ENGINE Carburetor
G333C ENGINE Exhaust Manifold
G333C ENGINE Turbocharger
G333C ENGINE Air Cleaner Housing
G333C ENGINE Differential Pressure Regulator
G333C ENGINE Spark Plug Adapters
G333C ENGINE Spark Plugs
G333C ENGINE Valves
G333C ENGINE Valve Seat Inserts
G333C ENGINE Pistons
G333C ENGINE Cylinder Liners
G333C ENGINE Flywheel
G333C ENGINE Crankshaft Rear Seal
G333C ENGINE Flywheel Housing
G333C ENGINE Crankshaft
G333C ENGINE Camshaft Bearings
G379, G398 & G399 ENGINES Systems Operation
G379, G398 & G399 ENGINES Testing And Adjusting
G379, G398 & G399 ENGINES Introduction