Spacer Plate
Usage:
Remove Spacer Plate
preparatory step:
a) remove cylinder head assembly
1. Install six 3/8"-16 NC forcing screws (1) and remove the spacer plate.
Install Spacer Plate
1. Thoroughly clean the spacer plate and mating surface of the cylinder block.
2. Install a new spacer plate gasket and install the spacer plate.
Show/hide table
NOTICE |
---|
Mating surfaces of spacer plate and cylinder block and both sides of spacer plate gasket must be clean and dry. Do not apply gasket adhesives or other substances to these surfaces. |
3. Check the liner projection. See INSTALL CYLINDER LINERS in DISASSEMBLY AND ASSEMBLY.
concluding step:
a) install cylinder head assembly
Caterpillar Information System:
G343 ENGINE Cylinder Head
G343 ENGINE Camshafts
G343 ENGINE Spark Plug Adapter
G343 ENGINE Spark Plugs & Valve Cover
G343 ENGINE Exhaust Manifold
G343 ENGINE Turbocharger & Regulator
G343 ENGINE Air Cleaner & Turbocharger
G343 ENGINE Engine Support
G343 ENGINE Crankshaft Front Seal
G343 ENGINE Damper & Pulley
G343 ENGINE Temperature Regulators
G343 ENGINE Crankshaft Main Bearings
G343 ENGINE Pistons
G343 ENGINE Cylinder Liners
G343 ENGINE Jacket Water Pump
G343 ENGINE Auxiliary Water Pump
G343 ENGINE Flywheel
G343 ENGINE Crankshaft Rear Seal
G343 ENGINE Flywheel Housing
G343 ENGINE Timing Gears
G343 ENGINE Timing Gear Plate
G343 ENGINE Crankshaft
DISASSEMBLY AND ASSEMBLY D346 Turbocharger Lubrication Valve
DISASSEMBLY AND ASSEMBLY D346 Filter Elements