Spark Plug Adapter
Usage:
Remove Spark Plug Adapter
preparatory steps:
a) remove spark plugs
b) remove valve cover
1. Using wrench (A), remove the spark plug adapter and washer.
Install Spark Plug Adapter
1. Install seal (2) and gasket (3) on spark plug adapter (1).
NOTE: Coat bore in head and rubber ring with liquid soap. Coat threads with 9M3710 Anti-Seize Compound.
2. Using wrench (A), install the adapter and tighten to 70 ± 5 lb. ft. (9,7 ± 0,7 mkg).
concluding steps:
a) install valve cover
b) install spark plugs
Caterpillar Information System:
G343 ENGINE Spark Plugs & Valve Cover
G343 ENGINE Exhaust Manifold
G343 ENGINE Turbocharger & Regulator
G343 ENGINE Air Cleaner & Turbocharger
G343 ENGINE Engine Support
G343 ENGINE Crankshaft Front Seal
G343 ENGINE Damper & Pulley
G343 ENGINE Temperature Regulators
G343 ENGINE Crankshaft Main Bearings
G343 ENGINE Oil Pan Plate
G343 ENGINE Oil Pump
G343 ENGINE Oil Pan & Pump
G343 ENGINE Camshafts
G343 ENGINE Cylinder Head
G343 ENGINE Spacer Plate
G343 ENGINE Pistons
G343 ENGINE Cylinder Liners
G343 ENGINE Jacket Water Pump
G343 ENGINE Auxiliary Water Pump
G343 ENGINE Flywheel
G343 ENGINE Crankshaft Rear Seal
G343 ENGINE Flywheel Housing
G343 ENGINE Timing Gears
G343 ENGINE Timing Gear Plate