Filter Elements
Usage:
Remove Oil Filter Elements
1. Drain the oil filter cases.
2. Loosen the case retaining bolts and remove the cases and elements.
Install Oil Filter Elements
1. Install new elements in the case assemblies.
2. Install the case assemblies and tighten the retaining bolts to 20 ± 5 lb. ft. (2,8 ± 0,7 mkg).
Caterpillar Information System:
DISASSEMBLY AND ASSEMBLY D346 Turbocharger Lubrication Valve
G343 ENGINE Crankshaft
G343 ENGINE Timing Gear Plate
G343 ENGINE Timing Gears
G343 ENGINE Flywheel Housing
G343 ENGINE Crankshaft Rear Seal
G343 ENGINE Flywheel
G343 ENGINE Auxiliary Water Pump
G343 ENGINE Jacket Water Pump
G343 ENGINE Cylinder Liners
G343 ENGINE Pistons
G343 ENGINE Spacer Plate
DISASSEMBLY AND ASSEMBLY D346 Oil Cooler
DISASSEMBLY AND ASSEMBLY D346 Oil Filter Base
DISASSEMBLY AND ASSEMBLY D346 Oil Pan
DISASSEMBLY AND ASSEMBLY D346 Oil Pump
DISASSEMBLY AND ASSEMBLY D346 Connecting Rod Bearings
DISASSEMBLY AND ASSEMBLY D346 Crankshaft Main Bearings
DISASSEMBLY AND ASSEMBLY D346 Piston Cooling Jets
DISASSEMBLY AND ASSEMBLY D346 Water Pump
DISASSEMBLY AND ASSEMBLY D346 (Later Engine)
DISASSEMBLY AND ASSEMBLY D346 Aftercooler Water Pump
DISASSEMBLY AND ASSEMBLY D346 Water Temp. Regulators
DISASSEMBLY AND ASSEMBLY D346 Vibration Damper And Pulley