Fuel Injection Valves
Usage:
Remove Fuel Injection Valves
start by:
a) remove valve cover
1. Remove the inner fuel injection line (1).
2. Remove the nut (2) from injection valve.
3. Remove the fuel injection valve from precombustion chamber.
4. Remove the nozzle assembly (4) from body (3).
Install Fuel Injection Valves
1. Install the nozzle assembly (1) finger tight on body (2).
Show/hide table
NOTICE |
---|
Do not tighten the nozzle assembly more than finger tight, or damage to the nozzle assembly may result. |
2. Put the fuel injection valve in position in precombustion chamber.
3. Install the tighten nut (3) to 55 ± 5 lb.ft. (7.6 ± 0.7 mkg).
4. Install the inner fuel injection line. Tighten the nuts to 30 ± 5 lb.ft. (4.1 ± 0.7 mkg).
end by:
a) install valve cover
Caterpillar Information System:
1674 DIESEL TRUCK ENGINE Glow Plugs
1674 DIESEL TRUCK ENGINE Valve Cover
1674 DIESEL TRUCK ENGINE Exhaust Manifold
1674 DIESEL TRUCK ENGINE Turbocharger
1674 DIESEL TRUCK ENGINE Water Temperature Regulator
1674 DIESEL TRUCK ENGINE Fuel Injection Lines
1674 DIESEL TRUCK ENGINE Aftercooler Core
1674 DIESEL TRUCK ENGINE Front Cover
1674 DIESEL TRUCK ENGINE Crankshaft Front Seal And Wear Sleeve
1674 DIESEL TRUCK ENGINE Engine Front Support
1674 DIESEL TRUCK ENGINE Vibration Damper And Crankshaft Hub
1674 DIESEL TRUCK ENGINE Fan Drive
1674 DIESEL TRUCK ENGINE Precombustion Chambers
1674 DIESEL TRUCK ENGINE Camshaft Housing
1674 DIESEL TRUCK ENGINE Cylinder Head Assembly
1674 DIESEL TRUCK ENGINE Spacer Plate
1674 DIESEL TRUCK ENGINE Pistons
1674 DIESEL TRUCK ENGINE Piston Rings
1674 DIESEL TRUCK ENGINE Cylinder Liners
1674 DIESEL TRUCK ENGINE Flywheel
1674 DIESEL TRUCK ENGINE Crankshaft Rear Seal And Wear Sleeve
1674 DIESEL TRUCK ENGINE Flywheel Housing
1674 DIESEL TRUCK ENGINE Timing Gear Housing
1674 DIESEL TRUCK ENGINE Timing Gears