Flywheel
Usage:
Remove Flywheel
1. Install bracket (A) on the flywheel, and fasten a hoist.
2. Remove the bolts that hold flywheel to the crankshaft.
3. Remove the flywheel. Weight of flywheel is 150 lb. (68 kg).
Install Flywheel
1. Install a 3/4"-16NF guide pin in the crankshaft. Install bracket (A) on flywheel.
2. Fasten a hoist and put the flywheel in position with the mark on flywheel in alignment with mark on crankshaft.
3. Install the bolts. Remove guide pin, and install the last bolt. Remove bracket (A).
Caterpillar Information System:
1674 DIESEL TRUCK ENGINE Cylinder Liners
1674 DIESEL TRUCK ENGINE Piston Rings
1674 DIESEL TRUCK ENGINE Pistons
1674 DIESEL TRUCK ENGINE Spacer Plate
1674 DIESEL TRUCK ENGINE Cylinder Head Assembly
1674 DIESEL TRUCK ENGINE Camshaft Housing
1674 DIESEL TRUCK ENGINE Precombustion Chambers
1674 DIESEL TRUCK ENGINE Fuel Injection Valves
1674 DIESEL TRUCK ENGINE Glow Plugs
1674 DIESEL TRUCK ENGINE Valve Cover
1674 DIESEL TRUCK ENGINE Exhaust Manifold
1674 DIESEL TRUCK ENGINE Turbocharger
1674 DIESEL TRUCK ENGINE Crankshaft Rear Seal And Wear Sleeve
1674 DIESEL TRUCK ENGINE Flywheel Housing
1674 DIESEL TRUCK ENGINE Timing Gear Housing
1674 DIESEL TRUCK ENGINE Timing Gears
1674 DIESEL TRUCK ENGINE Timing Gear Plate
1674 DIESEL TRUCK ENGINE Crankshaft
1674 DIESEL TRUCK ENGINE Crankshaft Gear
G343 ENGINE Carburetor
G343 ENGINE Gas Pressure Regulator
G343 ENGINE Aftercooler Core
G343 ENGINE Governor
G343 ENGINE Governor Drive