Flywheel Housing
Usage:
Remove Flywheel Housing
start by:
a) remove starter
b) remove flywheel
1. Remove the bolts (1) and nuts that hold the flywheel housing in position.
2. Remove the flywheel housing. Weight of housing is 60 lb. (27 kg).
Install Flywheel Housing
1. Put the flywheel housing (1) in position on the engine.
2. Install the bolts and nuts that hold housing in place.
end by:
a) install flywheel
b) install starter
Caterpillar Information System:
1674 DIESEL TRUCK ENGINE Crankshaft Rear Seal And Wear Sleeve
1674 DIESEL TRUCK ENGINE Flywheel
1674 DIESEL TRUCK ENGINE Cylinder Liners
1674 DIESEL TRUCK ENGINE Piston Rings
1674 DIESEL TRUCK ENGINE Pistons
1674 DIESEL TRUCK ENGINE Spacer Plate
1674 DIESEL TRUCK ENGINE Cylinder Head Assembly
1674 DIESEL TRUCK ENGINE Camshaft Housing
1674 DIESEL TRUCK ENGINE Precombustion Chambers
1674 DIESEL TRUCK ENGINE Fuel Injection Valves
1674 DIESEL TRUCK ENGINE Glow Plugs
1674 DIESEL TRUCK ENGINE Valve Cover
1674 DIESEL TRUCK ENGINE Timing Gear Housing
1674 DIESEL TRUCK ENGINE Timing Gears
1674 DIESEL TRUCK ENGINE Timing Gear Plate
1674 DIESEL TRUCK ENGINE Crankshaft
1674 DIESEL TRUCK ENGINE Crankshaft Gear
G343 ENGINE Carburetor
G343 ENGINE Gas Pressure Regulator
G343 ENGINE Aftercooler Core
G343 ENGINE Governor
G343 ENGINE Governor Drive
G343 ENGINE Woodward Governor
G343 ENGINE Woodward Governor Drive