Glow Plugs
Usage:
Remove Glow Plugs
start by:
a) remove valve cover
1. Disconnect wiring (1) from the glow plug.
2. Remove the glow plug (2) from the precombustion chamber.
Install Glow Plugs
1. Put 9M3710 Anit-Seize Compound on the threads of glow plug.
2. Put the glow plug (1) in position in chamber. Tighten the plug to 120 ± 24 lb.in. (138.4 ± 27.7 cm.kg).
3. Connect wiring to glow plug.
end by:
a) install valve cover
Caterpillar Information System:
1674 DIESEL TRUCK ENGINE Valve Cover
1674 DIESEL TRUCK ENGINE Exhaust Manifold
1674 DIESEL TRUCK ENGINE Turbocharger
1674 DIESEL TRUCK ENGINE Water Temperature Regulator
1674 DIESEL TRUCK ENGINE Fuel Injection Lines
1674 DIESEL TRUCK ENGINE Aftercooler Core
1674 DIESEL TRUCK ENGINE Front Cover
1674 DIESEL TRUCK ENGINE Crankshaft Front Seal And Wear Sleeve
1674 DIESEL TRUCK ENGINE Engine Front Support
1674 DIESEL TRUCK ENGINE Vibration Damper And Crankshaft Hub
1674 DIESEL TRUCK ENGINE Fan Drive
1674 DIESEL TRUCK ENGINE Fan
1674 DIESEL TRUCK ENGINE Fuel Injection Valves
1674 DIESEL TRUCK ENGINE Precombustion Chambers
1674 DIESEL TRUCK ENGINE Camshaft Housing
1674 DIESEL TRUCK ENGINE Cylinder Head Assembly
1674 DIESEL TRUCK ENGINE Spacer Plate
1674 DIESEL TRUCK ENGINE Pistons
1674 DIESEL TRUCK ENGINE Piston Rings
1674 DIESEL TRUCK ENGINE Cylinder Liners
1674 DIESEL TRUCK ENGINE Flywheel
1674 DIESEL TRUCK ENGINE Crankshaft Rear Seal And Wear Sleeve
1674 DIESEL TRUCK ENGINE Flywheel Housing
1674 DIESEL TRUCK ENGINE Timing Gear Housing