Marine Engine Oil Cooler
Usage:
Remove Marine Engine Oil Cooler
preparatory step:
a) remove marine gear oil cooler
1. Remove drain plug (4) and drain the oil cooler.
2. Remove retaining bolt and clamp (1). Remove oil cooler oil outlet line (5).
3. Disconnect oil cooler oil inlet elbow (2).
4. Remove eight oil cooler-to-flywheel housing mounting bolts (3) and remove the oil cooler assembly-weight 45 lbs. (20,4 kg).
Install Marine Engine Oil Cooler
1. Position the oil cooler assembly on the engine and install oil cooler-to-flywheel housing mounting bolts.
2. Connect the oil cooler oil inlet elbow.
3. Install the oil cooler oil outlet line. Install the line retaining clamp and bolt.
4. Install the oil cooler drain plug. Check the oil level after the engine is started.
concluding step:
a) install marine gear oil cooler
Caterpillar Information System:
D343 INDUSTRIAL & MARINE ENGINES Marine Gear Oil Cooler
D343 INDUSTRIAL & MARINE ENGINES Industrial Engine Oil Cooler
D343 INDUSTRIAL & MARINE ENGINES Accessory Drive Housing
D343 INDUSTRIAL & MARINE ENGINES Variable Timing
D343 INDUSTRIAL & MARINE ENGINES Variable Timing Unit
D343 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump
D343 INDUSTRIAL & MARINE ENGINES Governor
D343 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump & Governor
D343 INDUSTRIAL & MARINE ENGINES Fuel Ratio Control
D343 INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump
D343 INDUSTRIAL & MARINE ENGINES Fuel Filter Housing
D343 INDUSTRIAL & MARINE ENGINES Fuel Priming Pump
D343 INDUSTRIAL & MARINE ENGINES Oil Filter Base
D343 INDUSTRIAL & MARINE ENGINES Connecting Rod Bearings
D343 INDUSTRIAL & MARINE ENGINES Oil Pan
D343 INDUSTRIAL & MARINE ENGINES Oil Pan Plate
D343 INDUSTRIAL & MARINE ENGINES Oil Pump
D343 INDUSTRIAL & MARINE ENGINES Crankshaft Main Bearings
D343 INDUSTRIAL & MARINE ENGINES Water Temperature Regulators
D343 INDUSTRIAL & MARINE ENGINES Heat Exchanger
D343 INDUSTRIAL & MARINE ENGINES Expansion Tank
D343 INDUSTRIAL & MARINE ENGINES Pulley And Vibration Damper
D343 INDUSTRIAL & MARINE ENGINES Crankshaft Front Seal
D343 INDUSTRIAL & MARINE ENGINES Front Cover