Fuel Filter Housing
Usage:
Remove Fuel Filter Housing
1. Remove both fuel filters.
2. Disconnect the fuel inlet and fuel return lines.
3. Disconnect the fuel filter housing bleed line (2).
4. Disconnect the turbocharger oil supply line clamp (1).
5. Remove five fuel filter housing mounting bolts (3) and remove fuel filter housing.
Install Fuel Filter Housing
1. Position the fuel filter housing (1) on the engine and install mounting bolts.
2. Connect the turbocharger oil supply line clamp.
3. Connect the fuel filter housing bleed line.
4. Connect fuel inlet and fuel return lines.
5. Install two new fuel filters.
Caterpillar Information System:
D343 INDUSTRIAL & MARINE ENGINES Fuel Priming Pump
DISASSEMBLY AND ASSEMBLY D346 Crankshaft
DISASSEMBLY AND ASSEMBLY D346 Rear Timing Gears And Plate
DISASSEMBLY AND ASSEMBLY D346 Flywheel Housing
DISASSEMBLY AND ASSEMBLY D346 Crankshaft Rear Seal Ring & Thrower
DISASSEMBLY AND ASSEMBLY D346 Flywheel
DISASSEMBLY AND ASSEMBLY D346 Air Compressor
DISASSEMBLY AND ASSEMBLY D346 Cylinder Liners
DISASSEMBLY AND ASSEMBLY D346 Pistons
DISASSEMBLY AND ASSEMBLY D346 Spacer Plates
DISASSEMBLY AND ASSEMBLY D346 Cylinder Head Assembly
DISASSEMBLY AND ASSEMBLY D346 Camshaft Housings
D343 INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump
D343 INDUSTRIAL & MARINE ENGINES Fuel Ratio Control
D343 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump & Governor
D343 INDUSTRIAL & MARINE ENGINES Governor
D343 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump
D343 INDUSTRIAL & MARINE ENGINES Variable Timing Unit
D343 INDUSTRIAL & MARINE ENGINES Variable Timing
D343 INDUSTRIAL & MARINE ENGINES Accessory Drive Housing
D343 INDUSTRIAL & MARINE ENGINES Industrial Engine Oil Cooler
D343 INDUSTRIAL & MARINE ENGINES Marine Gear Oil Cooler
D343 INDUSTRIAL & MARINE ENGINES Marine Engine Oil Cooler
D343 INDUSTRIAL & MARINE ENGINES Oil Filter Base