Variable Timing Unit
Usage:
Remove Variable Timing Unit
preparatory steps:
a) remove fuel injection pump housing & governor
b) remove fuel transfer pump
1. Remove the slip coupling access cover from the accessory drive housing and remove both coupling bolts (1) and lock.
2. Remove the variable timing unit from the accessory drive housing.
Install Variable Timing Unit
1. Place the variable timing unit (1) in the accessory drive housing.
2. Install the coupling bolts and lock. Do not tighten the coupling bolts until the engine has been timed.
concluding steps:
a) install fuel transfer pump
b) install fuel injection pump housing and governor
Caterpillar Information System:
D343 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump
D343 INDUSTRIAL & MARINE ENGINES Governor
D343 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump & Governor
D343 INDUSTRIAL & MARINE ENGINES Fuel Ratio Control
D343 INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump
D343 INDUSTRIAL & MARINE ENGINES Fuel Filter Housing
D343 INDUSTRIAL & MARINE ENGINES Fuel Priming Pump
DISASSEMBLY AND ASSEMBLY D346 Crankshaft
DISASSEMBLY AND ASSEMBLY D346 Rear Timing Gears And Plate
DISASSEMBLY AND ASSEMBLY D346 Flywheel Housing
DISASSEMBLY AND ASSEMBLY D346 Crankshaft Rear Seal Ring & Thrower
DISASSEMBLY AND ASSEMBLY D346 Flywheel
D343 INDUSTRIAL & MARINE ENGINES Variable Timing
D343 INDUSTRIAL & MARINE ENGINES Accessory Drive Housing
D343 INDUSTRIAL & MARINE ENGINES Industrial Engine Oil Cooler
D343 INDUSTRIAL & MARINE ENGINES Marine Gear Oil Cooler
D343 INDUSTRIAL & MARINE ENGINES Marine Engine Oil Cooler
D343 INDUSTRIAL & MARINE ENGINES Oil Filter Base
D343 INDUSTRIAL & MARINE ENGINES Connecting Rod Bearings
D343 INDUSTRIAL & MARINE ENGINES Oil Pan
D343 INDUSTRIAL & MARINE ENGINES Oil Pan Plate
D343 INDUSTRIAL & MARINE ENGINES Oil Pump
D343 INDUSTRIAL & MARINE ENGINES Crankshaft Main Bearings
D343 INDUSTRIAL & MARINE ENGINES Water Temperature Regulators