1982/06/14 Caterpillar


Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies{1053,1052}

Usage:


All Engines Equipped With AiResearch Model TV81 Turbochargers

SUPPLEMENT: 08/23/82

SERVICE MAGAZINE, JUNE 14, 1982, PAGE 3. In the article, "Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies", change the last paragraph to read as follows:

The improved part has been put in effect first on 3406 Truck Engines, with Serial Numbers 92U55635. It is adaptable to TV81 Turbochargers on 3406 Truck Engines 92U13178-Up. Other "In Effect" serial numbers are not yet available.

--------------- END SUPPLEMENT ---------------

Description of Change: The turbine wheel used in shaft and wheel assemblies for AiResearch Model TV81 Turbochargers is now made of a stronger material. This will prevent turbocharger failures which can be caused by a broken turbine blade in some specific load conditions. Formerly, it was possible for some conditions to cause a vibration stress which broke one blade of the turbine wheel. This destroyed the balance of the shaft assembly, and the result was heavy damage to the turbocharger bearings and other parts.

Adaptable As: Direct replacement. The part numbers of the 6N4606 and 9N2043 Turbine Shaft And Wheel Assemblies did not change. Identification of the improved part can be made by a number "4" on the nose piece of the turbine wheel.

The improved part has been put in effect first on 3406 Truck Engines, with Serial Numbers 92U55635-Up. It is adaptable to TV81 Turbochargers on 3406 Truck Engines 92U13178-Up. Other "In Effect" serial numbers are not yet available.

Caterpillar Information System:

1982/06/07 Identification Numbers For Caterpillar Partial Machines{0300}
1982/06/07 Use Correct Torque On Hydraulic Fittings{7554,5057}
1982/06/07 List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07 Separate Valve Stem Gauges Available{0653,1000}
1982/05/31 Separate Serial Numbers For 3208 Remanufactured Engines {1000}
1982/05/31 Improved Water Separator Group Used {1263}
1982/05/24 New Seal Used In Turbocharger Mounting; Check Mount Casting For Clearance{1052}
1982/05/24 New Auxiliary Pump Group Operates At A Slower RPM{1371}
1982/05/17 Fuel Ratio Control Is Now Available As A Group{1278}
1982/05/17 Improvements Made To 6V3000 Sure Seal Repair Kit{0611,1408}
1982/05/17 Larger Studs Can Be Used With Rear Exhaust Manifolds{1059}
1982/05/17 Wrong Water Separator Element Will Not Remove Water{1263}
1982/06/14 Improvements Made To Input Shaft Group{3303}
1982/06/14 New Address For Repair Of Diagnostic Tools{0650}
1982/06/21 Hose Presses Can Now Be Used To Install JIC Couplings{0623,7554,0624}
1982/06/21 Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings{1202,1203,1400,1405}
1982/06/21 Different Pipe Plug In Turbocharger Turbine Housing Prevents Contact With Oil Filter{1052,1318}
1982/06/21 New Piston Group Has A Thicker Top Ring{1215,1214,1213,1225,1226,1227}
1982/06/28 6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28 Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28 Explanation For "Notice" And "Warning" In Service Publications{0374,0375}
1982/06/28 Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/07/05 Use Correct Torque To Prevent Broken Rocker Arm Shafts{1102}
1982/07/05 Water Cooled Turbocharger Now Used{1052,1307,1380}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.