Usage:
- SUPPLEMENT: 09/13/82
SERVICE MAGAZINE, JUNE 28, 1982, PAGE 5. In the article "6V6124 Calibration Coil Available ..." the Special Instruction form number is given as SEHS8030. Change the Special Instruction form number to SMHS8070.
--------------- END SUPPLEMENT ---------------
The 6V6124 Calibration Coil can be used with the 5P8608 Calibration Group to calibrate and check the accuracy of the 6V4910 AC/DC Clamp-On Ammeter.
The 5P8608 Calibration Group has an existing 5P8609 Calibration Coil. This 5P8609 Calibration Coil can not be used to check the 6V4910 Ammeter because the cross section is too large to fit the opening of the hand held ammeter.
| NOTICE |
|---|
The 6V6124 Calibration Coil must not be used to check or calibrate the 5P969 Ammeter, 2P5540 Ammeter or the 5P300 Electrical Tester. Use the 5P8609 Calibration Coil to check these ammeters.
|
The Special Instruction, Form SEHS8070, sent with the 6V6124 Calibration Coil must be followed exactly to obtain accurate results on the 6V4910 Ammeter.