1982/06/07 Caterpillar


Separate Valve Stem Gauges Available{0653,1000}

Usage:


All Caterpillar Engines

The valve stem gauges in the 6V0087 Valve Stem Gauge group are now available separately. Formerly, these gauges had to be ordered as a group.

Order Form SEHS7758 (instruction card) and the 5P4227 Tag Holder separately; these are included in the group but not with separate gauges.

See the chart that follows for correct gauge part numbers and acceptable dimensions. Remember that it is often difficult to measure slots with accuracy with other measuring tools.


Illustration 1. 6V0087 Valve Stem Gauge Group


Illustration 2. Location of dimensions A and B.

Caterpillar Information System:

1982/05/31 Separate Serial Numbers For 3208 Remanufactured Engines {1000}
1982/05/31 Improved Water Separator Group Used {1263}
1982/05/24 New Seal Used In Turbocharger Mounting; Check Mount Casting For Clearance{1052}
1982/05/24 New Auxiliary Pump Group Operates At A Slower RPM{1371}
1982/05/17 Fuel Ratio Control Is Now Available As A Group{1278}
1982/05/17 Improvements Made To 6V3000 Sure Seal Repair Kit{0611,1408}
1982/05/17 Larger Studs Can Be Used With Rear Exhaust Manifolds{1059}
1982/05/17 Wrong Water Separator Element Will Not Remove Water{1263}
1982/05/17 Holes Added To Water Pump Impeller{1361}
1982/05/10 Two-Piece Guard For Alternator Fan And Belts{1400}
1982/05/10 Fuel Rack Slots Have Improved Wear Resistance{1257}
1982/05/10 Be Sure To Use Correct Water Temperature Regulators{1355}
1982/06/07 List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07 Use Correct Torque On Hydraulic Fittings{7554,5057}
1982/06/07 Identification Numbers For Caterpillar Partial Machines{0300}
1982/06/14 Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies{1053,1052}
1982/06/14 Improvements Made To Input Shaft Group{3303}
1982/06/14 New Address For Repair Of Diagnostic Tools{0650}
1982/06/21 Hose Presses Can Now Be Used To Install JIC Couplings{0623,7554,0624}
1982/06/21 Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings{1202,1203,1400,1405}
1982/06/21 Different Pipe Plug In Turbocharger Turbine Housing Prevents Contact With Oil Filter{1052,1318}
1982/06/21 New Piston Group Has A Thicker Top Ring{1215,1214,1213,1225,1226,1227}
1982/06/28 6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28 Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.