1982/05/17 Caterpillar


Improvements Made To 6V3000 Sure Seal Repair Kit{0611,1408}

Usage:


See Page 2 of April 19, 1982 Service Magazine. In the article "Improvements Made To 6V3000 Sure Seal Repair Kit" some incorrect information was given. Put a mark through the article and make a reference to this article.

The 6V3000 Sure Seal Repair Kit is used to make field repairs on any electrical wiring harness which has Sure Seal Connectors. Also, the kit can be used to make up new wiring harnesses for attachments or modifications to vehicles.

Improvements have been made to the 6V3000 Sure Seal Repair Kit which makes it easier to use. The kit now has a new 6V3008 Insertion Tool, a 6V3001 Crimping Tool and extra Sure Seal connector parts. Also, the kit has a space for rubber lubricant (alcohol). The 6V3002 Tool, 6V3003 Block and 6V3004, 6V3005 and 6V3006 Guards have been removed from the kit.

Because of the improvements made to the 6V3000 Sure Seal Repair Kit, different instructions are needed for use of the new tools. Special Instruction, Form No. SMHS7531-01 gives complete instructions for use of the new tools in the kit.

Caterpillar Information System:

1982/05/17 Larger Studs Can Be Used With Rear Exhaust Manifolds{1059}
1982/05/17 Wrong Water Separator Element Will Not Remove Water{1263}
1982/05/17 Holes Added To Water Pump Impeller{1361}
1982/05/10 Two-Piece Guard For Alternator Fan And Belts{1400}
1982/05/10 Fuel Rack Slots Have Improved Wear Resistance{1257}
1982/05/10 Be Sure To Use Correct Water Temperature Regulators{1355}
1982/05/10 5P3519 Gauge Group Components Available Separately{0653,1215}
1982/05/10 5P4812 Gauge Group Components Available Separately{0653,1215}
1982/05/10 New Mounting Bracket For Mechanical Shut-Off Cable{7418}
1982/05/10 New Crankshaft Main Bearings Used{1203}
1982/05/10 New Exhaust Tubes And Support Used{1061,1067}
1982/05/10 Bolts Now Used Instead Of Studs To Hold Cylinder Heads{1101,1201}
1982/05/17 Fuel Ratio Control Is Now Available As A Group{1278}
1982/05/24 New Auxiliary Pump Group Operates At A Slower RPM{1371}
1982/05/24 New Seal Used In Turbocharger Mounting; Check Mount Casting For Clearance{1052}
1982/05/31 Improved Water Separator Group Used {1263}
1982/05/31 Separate Serial Numbers For 3208 Remanufactured Engines {1000}
1982/06/07 Separate Valve Stem Gauges Available{0653,1000}
1982/06/07 List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07 Use Correct Torque On Hydraulic Fittings{7554,5057}
1982/06/07 Identification Numbers For Caterpillar Partial Machines{0300}
1982/06/14 Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies{1053,1052}
1982/06/14 Improvements Made To Input Shaft Group{3303}
1982/06/14 New Address For Repair Of Diagnostic Tools{0650}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.