Timing Gear Plate
Usage:
Remove Timing Gear Plate
start by:
a) remove timing gears
b) remove air compressor
1. Remove the bolts (2) and locks that hold the timing gear plate to the cylinder block.
2. Remove timing gear plate (1).
Install Timing Gear Plate
1. Install a new gasket for the timing gear plate.
2. Put the timing gear plate in position on cylinder block and install the bolts and locks.
3. Cut the gasket even with oil pan face of the cylinder block.
end by:
a) install air compressor
b) install timing gears
Caterpillar Information System:
1674 DIESEL TRUCK ENGINE Timing Gears
1674 DIESEL TRUCK ENGINE Timing Gear Housing
1674 DIESEL TRUCK ENGINE Flywheel Housing
1674 DIESEL TRUCK ENGINE Crankshaft Rear Seal And Wear Sleeve
1674 DIESEL TRUCK ENGINE Flywheel
1674 DIESEL TRUCK ENGINE Cylinder Liners
1674 DIESEL TRUCK ENGINE Piston Rings
1674 DIESEL TRUCK ENGINE Pistons
1674 DIESEL TRUCK ENGINE Spacer Plate
1674 DIESEL TRUCK ENGINE Cylinder Head Assembly
1674 DIESEL TRUCK ENGINE Camshaft Housing
1674 DIESEL TRUCK ENGINE Precombustion Chambers
1674 DIESEL TRUCK ENGINE Crankshaft
1674 DIESEL TRUCK ENGINE Crankshaft Gear
G343 ENGINE Carburetor
G343 ENGINE Gas Pressure Regulator
G343 ENGINE Aftercooler Core
G343 ENGINE Governor
G343 ENGINE Governor Drive
G343 ENGINE Woodward Governor
G343 ENGINE Woodward Governor Drive
G343 ENGINE Magneto
G343 ENGINE Magneto Drive
G343 ENGINE Oil Filter Base