326F Excavator Machine System Specifications Caterpillar


Stick Cylinder

Usage:

326F EBK


Illustration 1g02560257

Table 1
Item  Qty  Part  Specification Description 
240-2914 Bushing  Inside diameter before assembly 80.20 ± 0.04 mm (3.157 ± 0.002 inch).
Installation depth is 10 mm (0.4 inch)
12  4I-3628 Bolt  Torque to 367 ± 55 N·m (271 ± 41 lb ft)
3B-8489 Grease Fitting  Torque to 9.32 ± 0.49 N·m (82.49 ± 4.34 lb in)
096-5625 Bushing  Outside diameter before assembly is 105 mm (4.1 inch).
Thickness is 2.47 mm (0.097 inch)
247-8873 Piston  Torque to 8890 ± 445 N·m (6557 ± 328 lb ft)
096-6210 Socket Setscrew  Torque to 56.9 ± 10.7 N·m (42.0 ± 7.9 lb ft).
After tightening the socket setscrew, stake the socket setscrew in two places. 
350-9336 Cylinder As  Bore diameter is 140 mm (5.5 inch)
350-9341 Rod As  Diameter is 100 mm (3.9 inch)

Caterpillar Information System:

AP1000E and BG1000E Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust - Right Propel
AP1000E and BG1000E Asphalt Pavers Propel System Piston Pump Flow - Test
AP1000E and BG1000E Asphalt Pavers Propel System Hydraulic Oil Contamination - Test
AP1000E and BG1000E Asphalt Pavers Propel System Propel System Troubleshooting
C9.3 Tier 4 Final Engines Engine Oil Filter Base
C15 and C18 Engines for Caterpillar Built Machines Electric Starting Motor
2011/08/23 Introduction of Radiator Protection Screen on C4.4 and C4.4 (Mech) Engines {1353}
320E and 323E Excavators Machine System Specifications Auxiliary Pump Drive and Mounting
326F Excavator Machine System Specifications Boom Cylinder
C175-16 Locomotive Engine Cylinder Liner
C13, C15, and C18 Generator Set Engines Turbocharger
Spill Guard Installation Procedure for Certain Buckets on R2900G Load Haul Dump Machines{7186} Spill Guard Installation Procedure for Certain Buckets on R2900G Load Haul Dump Machines{7186}
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Air Cleaner Inlet - Clean
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Air Filter Primary Element - Clean/Replace
2011/06/06 Radio Ready Series C SSL, MTL, and CTL Machines Are Now Available For Order {7338}
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Oil Sample - Obtain
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Oil and Filter - Change
C175-16 Locomotive Engine Gear Group (Rear)
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Parking Brake - Remove and Install
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Fuel System - Prime
AP1000E and BG1000E Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust - Left Propel
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Fuel System Secondary Filter - Replace
735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Engine Front Mount - Remove and Install
Topcon® System Five Safety Messages
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.