AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Caterpillar


Fuel System - Prime

Usage:

AP-1000E DKH



Illustration 1g02560456

  1. Operate the fuel priming pump in order to fill the new filter element with fuel. Push the switch downward in order to activate the fuel priming pump. Hold the switch downward for a few seconds.

  1. Start the engine. If the engine will not start, further priming is necessary. If the engine starts but the engine continues to misfire, further priming is necessary. If the engine starts but the engine continues to emit smoke, further priming is necessary.

  1. If the engine starts but the engine runs rough, continue to run the engine at low idle. Continue to run the engine at low idle until the engine runs smoothly.

Caterpillar Information System:

2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Parking Brake - Remove and Install
C175-16 Locomotive Engine Gear Group (Rear)
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Oil and Filter - Change
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Oil Sample - Obtain
2011/06/06 Radio Ready Series C SSL, MTL, and CTL Machines Are Now Available For Order {7338}
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Air Filter Primary Element - Clean/Replace
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Air Cleaner Inlet - Clean
326F Excavator Machine System Specifications Stick Cylinder
AP1000E and BG1000E Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust - Right Propel
AP1000E and BG1000E Asphalt Pavers Propel System Piston Pump Flow - Test
AP1000E and BG1000E Asphalt Pavers Propel System Hydraulic Oil Contamination - Test
AP1000E and BG1000E Asphalt Pavers Propel System Propel System Troubleshooting
AP1000E and BG1000E Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust - Left Propel
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Fuel System Secondary Filter - Replace
735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Engine Front Mount - Remove and Install
Topcon® System Five Safety Messages
AP1000E and BG1000E Asphalt Pavers Propel System Pump Synchronization - Test and Adjust
AP1000E and BG1000E Asphalt Pavers Propel System Pressure Limiter Valve - Test and Adjust - Right Pump
AP1000E and BG1000E Asphalt Pavers Propel System Pressure Limiter Valve - Test and Adjust - Left Pump
AP1000E and BG1000E Asphalt Pavers Propel System Relief Valve (Charge) - Test and Adjust - Right Pump
AP1000E and BG1000E Asphalt Pavers Propel System Relief Valve (Charge) - Test and Adjust - Left Pump
SS-56 Felling Head Troubleshooting
AP1000E and BG1000E Asphalt Pavers Propel System Seal Leakage for Final Drive Planetary - Test
3516B Engine for 994F and 994H Wheel Loaders Cat Data Link - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.