Cylinder Liner
Show/hide table
| |
| 图 1 | g03397584 |
Show/hide table
| 317-6283 缸套总成的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 1 | 381-3969 套筒 | 套筒的平均外径 (B) 为 |
| 套筒的平均内径 (C) 为 |
|||
| 套筒的高度 (D) 为 |
|||
| 2 | 1 | 422-6176 O 形密封圈 | 将缸套装入缸体前，安装 O 形密封圈。 |
| 安装缸套前，使用肥皂液或 P80 橡胶润滑剂涂覆 O 形密封圈。 | |||
| 3 | 2 | 253-9950 O 形密封圈 | 将缸套装入缸体前，安装 O 形密封圈。 |
| 安装缸套前，使用肥皂液或 P80 橡胶润滑剂涂覆 O 形密封圈。 | |||
| 4 | 1 | 377-8485 缸套 | 缸径 (A) 为 |
| 缸套的法兰厚度 (E) 为 |
|||
| 按照以下步骤安装缸套：
1. 将缸套装入缸体前，安装 O 形密封圈。 2. 在缸套孔表面涂膜肥皂液。 3. O 形密封圈膨胀前，立即将缸套安装到缸体中。 |
|||
Caterpillar Information System:
C13, C15, and C18 Generator Set Engines Turbocharger
Spill Guard Installation Procedure for Certain Buckets on R2900G Load Haul Dump Machines{7186} Spill Guard Installation Procedure for Certain Buckets on R2900G Load Haul Dump Machines{7186}
R1600G Load Haul Dump 3176C Engine Supplement Transmission Oil Cooler - Remove
SC-57 Felling Head Felling Head Disc Saw Performance - Test and Adjust
C9.3 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install
C9.3 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C9.3 Engines for Caterpillar Built Machines Flywheel - Remove and Install
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Brake Accumulator (Service) - Remove and Install
2011/08/26 A New Wiring Harness Is Used On Certain Commercial Engines {1408, 1900}
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Drive Shaft (Rear) - Remove and Install
262C2 Skid Steer Loader, 277C2 and 287C2 Multi Terrain Loaders and 279C2 and 289C2 Compact Track Loaders Rated Load
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Drive Shaft (Center) - Remove and Install
326F Excavator Machine System Specifications Boom Cylinder
320E and 323E Excavators Machine System Specifications Auxiliary Pump Drive and Mounting
2011/08/23 Introduction of Radiator Protection Screen on C4.4 and C4.4 (Mech) Engines {1353}
C15 and C18 Engines for Caterpillar Built Machines Electric Starting Motor
C9.3 Tier 4 Final Engines Engine Oil Filter Base
AP1000E and BG1000E Asphalt Pavers Propel System Propel System Troubleshooting
AP1000E and BG1000E Asphalt Pavers Propel System Hydraulic Oil Contamination - Test
AP1000E and BG1000E Asphalt Pavers Propel System Piston Pump Flow - Test
AP1000E and BG1000E Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust - Right Propel
326F Excavator Machine System Specifications Stick Cylinder
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Air Cleaner Inlet - Clean
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Air Filter Primary Element - Clean/Replace