C9.3 Tier 4 Final Engines Caterpillar


Engine Oil Filter Base

Usage:

D6T 2B3


Illustration 1g02560177
(F) Length is 10.5 ± 1.5 mm (0.41 ± 0.06 inch)

Table 1
Specification for 281-8366 Oil Filter Base 
Item  Qty  Part  Specification Description 
319-6234 Plug As  Torque to 100 ± 15 N·m (74 ± 11 lb ft)
1A-2170 Retainer Spring  Length under test force is 21.4 mm (0.84 inch).
Test force is 184.6 to 215.7 N (41.5 to 48.5 lb).
Free length after test is 31 mm (1.2 inch)
2P-4304 Hollow Stud  Apply red Loctite 271 to the length of (F).
Torque to 68 ± 7 N·m (50 ± 5 lb ft)
4N-8150 Spring  Length under test force is 55.24 mm (2.175 inch).
Test force is 75.619 ± 5.800 N (17.000 ± 1.304 lb).
Free length after test is 93.726 mm (3.6900 inch)
2N-6005 Spring  Length under test force is 96.52 mm (3.800 inch).
Test force is 92.52 N (20.800 lb).
Free length after test is 124.71 mm (4.910 inch)

Caterpillar Information System:

C15 and C18 Engines for Caterpillar Built Machines Electric Starting Motor
2011/08/23 Introduction of Radiator Protection Screen on C4.4 and C4.4 (Mech) Engines {1353}
320E and 323E Excavators Machine System Specifications Auxiliary Pump Drive and Mounting
326F Excavator Machine System Specifications Boom Cylinder
C175-16 Locomotive Engine Cylinder Liner
C13, C15, and C18 Generator Set Engines Turbocharger
Spill Guard Installation Procedure for Certain Buckets on R2900G Load Haul Dump Machines{7186} Spill Guard Installation Procedure for Certain Buckets on R2900G Load Haul Dump Machines{7186}
R1600G Load Haul Dump 3176C Engine Supplement Transmission Oil Cooler - Remove
SC-57 Felling Head Felling Head Disc Saw Performance - Test and Adjust
C9.3 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install
C9.3 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C9.3 Engines for Caterpillar Built Machines Flywheel - Remove and Install
AP1000E and BG1000E Asphalt Pavers Propel System Propel System Troubleshooting
AP1000E and BG1000E Asphalt Pavers Propel System Hydraulic Oil Contamination - Test
AP1000E and BG1000E Asphalt Pavers Propel System Piston Pump Flow - Test
AP1000E and BG1000E Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust - Right Propel
326F Excavator Machine System Specifications Stick Cylinder
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Air Cleaner Inlet - Clean
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Air Filter Primary Element - Clean/Replace
2011/06/06 Radio Ready Series C SSL, MTL, and CTL Machines Are Now Available For Order {7338}
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Oil Sample - Obtain
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Oil and Filter - Change
C175-16 Locomotive Engine Gear Group (Rear)
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Parking Brake - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.