C175-16 Locomotive Engine Caterpillar


Gear Group (Rear)

Usage:

C175-16 3A9


Illustration 1g02562838
(2) Camshaft gear

Table 1
Specification for 327-0824 Rear Gear Gp 
Item  Qty  Part  Specification Description 
328-7113 Cluster Gear Shaft  Diameter is 74.970 ± 0.010 mm (2.9516 ± 0.0004 inch)
254-5887 Bushing  Bore in the bushing after installation is 75.060 ± 0.010 mm (2.9551 ± 0.0004 inch)
Installation depth of the bushing is 2.0 ± 0.5 mm (0.08 ± 0.02 inch).
The mark on the idler gear assembly (4) must be in alignment with the mark on the crankshaft gear (5). 

Caterpillar Information System:

AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Oil and Filter - Change
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Oil Sample - Obtain
2011/06/06 Radio Ready Series C SSL, MTL, and CTL Machines Are Now Available For Order {7338}
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Air Filter Primary Element - Clean/Replace
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Air Cleaner Inlet - Clean
326F Excavator Machine System Specifications Stick Cylinder
AP1000E and BG1000E Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust - Right Propel
AP1000E and BG1000E Asphalt Pavers Propel System Piston Pump Flow - Test
AP1000E and BG1000E Asphalt Pavers Propel System Hydraulic Oil Contamination - Test
AP1000E and BG1000E Asphalt Pavers Propel System Propel System Troubleshooting
C9.3 Tier 4 Final Engines Engine Oil Filter Base
C15 and C18 Engines for Caterpillar Built Machines Electric Starting Motor
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Parking Brake - Remove and Install
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Fuel System - Prime
AP1000E and BG1000E Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust - Left Propel
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Fuel System Secondary Filter - Replace
735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Engine Front Mount - Remove and Install
Topcon® System Five Safety Messages
AP1000E and BG1000E Asphalt Pavers Propel System Pump Synchronization - Test and Adjust
AP1000E and BG1000E Asphalt Pavers Propel System Pressure Limiter Valve - Test and Adjust - Right Pump
AP1000E and BG1000E Asphalt Pavers Propel System Pressure Limiter Valve - Test and Adjust - Left Pump
AP1000E and BG1000E Asphalt Pavers Propel System Relief Valve (Charge) - Test and Adjust - Right Pump
AP1000E and BG1000E Asphalt Pavers Propel System Relief Valve (Charge) - Test and Adjust - Left Pump
SS-56 Felling Head Troubleshooting
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.