Boom Cylinder
Show/hide table
| |
| Illustration 1 | g02560038 |
Show/hide table
| Item | Qty | Part | Specification Description |
| 1 | 2 | 290-9181 Bushing | Inside diameter before assembly Installation depth is |
| 2 | 12 | 4I-3628 Bolt | Torque to |
| A | 1 | 350-9335 Cylinder As | Bore diameter is |
| B | 1 | 350-9340 Rod As | Diameter is |
| 3 | 1 | 3B-8489 Grease Fitting | Torque to |
| 4 | 1 | 096-4430 Bushing | Outside diameter before assembly is Thickness is |
| 5 | 1 | 234-4582 Piston | Torque to |
| 6 | 1 | 096-6210 Socket Setscrew | Torque to After tightening the socket setscrew, stake the socket setscrew in two places. |
Caterpillar Information System:
C175-16 Locomotive Engine Cylinder Liner
C13, C15, and C18 Generator Set Engines Turbocharger
Spill Guard Installation Procedure for Certain Buckets on R2900G Load Haul Dump Machines{7186} Spill Guard Installation Procedure for Certain Buckets on R2900G Load Haul Dump Machines{7186}
R1600G Load Haul Dump 3176C Engine Supplement Transmission Oil Cooler - Remove
SC-57 Felling Head Felling Head Disc Saw Performance - Test and Adjust
C9.3 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install
C9.3 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C9.3 Engines for Caterpillar Built Machines Flywheel - Remove and Install
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Brake Accumulator (Service) - Remove and Install
2011/08/26 A New Wiring Harness Is Used On Certain Commercial Engines {1408, 1900}
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Drive Shaft (Rear) - Remove and Install
262C2 Skid Steer Loader, 277C2 and 287C2 Multi Terrain Loaders and 279C2 and 289C2 Compact Track Loaders Rated Load
320E and 323E Excavators Machine System Specifications Auxiliary Pump Drive and Mounting
2011/08/23 Introduction of Radiator Protection Screen on C4.4 and C4.4 (Mech) Engines {1353}
C15 and C18 Engines for Caterpillar Built Machines Electric Starting Motor
C9.3 Tier 4 Final Engines Engine Oil Filter Base
AP1000E and BG1000E Asphalt Pavers Propel System Propel System Troubleshooting
AP1000E and BG1000E Asphalt Pavers Propel System Hydraulic Oil Contamination - Test
AP1000E and BG1000E Asphalt Pavers Propel System Piston Pump Flow - Test
AP1000E and BG1000E Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust - Right Propel
326F Excavator Machine System Specifications Stick Cylinder
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Air Cleaner Inlet - Clean
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Air Filter Primary Element - Clean/Replace
2011/06/06 Radio Ready Series C SSL, MTL, and CTL Machines Are Now Available For Order {7338}