Parking Brake - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | QTY |
A | 311-1362 | Vacuum Cap | 1 |
Start By:
- Remove center drive shaft.
- Remove front drive shaft.
- Attach Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A). Apply
() . This procedure will pull a vacuum on the hydraulic system.Show/hide tableIllustration 1 g02560477 - Remove hose assembly (1). Remove bolts (3). Attach a suitable lifting device to parking brake (2). The weight of parking brake (2) is approximately
54 kg (119 lb) .
- Install parking brake (2) in the reverse order of removal.
Caterpillar Information System:
C175-16 Locomotive Engine Gear Group (Rear)
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Oil and Filter - Change
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Oil Sample - Obtain
2011/06/06 Radio Ready Series C SSL, MTL, and CTL Machines Are Now Available For Order {7338}
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Air Filter Primary Element - Clean/Replace
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Engine Air Cleaner Inlet - Clean
326F Excavator Machine System Specifications Stick Cylinder
AP1000E and BG1000E Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust - Right Propel
AP1000E and BG1000E Asphalt Pavers Propel System Piston Pump Flow - Test
AP1000E and BG1000E Asphalt Pavers Propel System Hydraulic Oil Contamination - Test
AP1000E and BG1000E Asphalt Pavers Propel System Propel System Troubleshooting
C9.3 Tier 4 Final Engines Engine Oil Filter Base
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Fuel System - Prime
AP1000E and BG1000E Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust - Left Propel
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Fuel System Secondary Filter - Replace
735B, 740B and 740B EJECTOR Articulated Trucks Engine Supplement Engine Front Mount - Remove and Install
Topcon® System Five Safety Messages
AP1000E and BG1000E Asphalt Pavers Propel System Pump Synchronization - Test and Adjust
AP1000E and BG1000E Asphalt Pavers Propel System Pressure Limiter Valve - Test and Adjust - Right Pump
AP1000E and BG1000E Asphalt Pavers Propel System Pressure Limiter Valve - Test and Adjust - Left Pump
AP1000E and BG1000E Asphalt Pavers Propel System Relief Valve (Charge) - Test and Adjust - Right Pump
AP1000E and BG1000E Asphalt Pavers Propel System Relief Valve (Charge) - Test and Adjust - Left Pump
SS-56 Felling Head Troubleshooting
AP1000E and BG1000E Asphalt Pavers Propel System Seal Leakage for Final Drive Planetary - Test