After Failure Only
| PRODUCT SUPPORT PROGRAM FOR REPLACING THE ECCENTRIC WEIGHTS ON CERTAIN CB44B, CB54B, CB7, CD10, CD44B, CD54, CD54B, AND CD8 ASPHALT COMPACTORS |
| 6606
|
PS53658 |
| NOTE: |
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
|
| NOTE: |
This Program can only be administered after a failure occurs.
The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS53658" as the Part Number
and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
| NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
| The existing eccentric weight can crack on certain CB54B, CB7, CD10, CD44B, CD54, CD54B, and CD8 Asphalt Compactors. If the existing eccentric weight cracks it can result in eccentric weight bearing failures. |
Qty |
Part Number |
Description |
|
*******Group 1*******
|
| 1 |
8T8883 |
SEAL-O-RING |
| 1 |
2280446 |
SEAL-LIP TYPE |
| 1 |
2280447 |
SEAL-V RING |
| 2 |
2280455 |
BEARING |
| 1 |
5328791 |
SHAFT GP-WT |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 3% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
|
|
*******Group 2*******
|
| 1 |
8T8883 |
SEAL-O-RING |
| 1 |
2280446 |
SEAL-LIP TYPE |
| 1 |
2280447 |
SEAL-V RING |
| 2 |
2280455 |
BEARING |
| 1 |
5328786 |
SHAFT GP-WT |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 3% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
|
|
*******Group 3*******
|
| 1 |
8T8883 |
SEAL-O-RING |
| 1 |
2280446 |
SEAL-LIP TYPE |
| 1 |
2280447 |
SEAL-V RING |
| 2 |
2280455 |
BEARING |
| 1 |
5328793 |
SHAFT GP-WT |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 3% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
|
| Refer to the appropriate disassembly and assembly manual for instructions regarding how to remove and install the eccentric weight. |
