CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Caterpillar

1. Disconnect and cap four lines (1).

2. Disconnect two wires (2).

3. Remove two bolts (3) and the vibratory control pump.

NOTE: Install in reverse order.

Disassemble & Assemble Vibratory Control Valve

Start By:

a. remove vibratory control valve

1. Remove two relief valve cartridges (4).

2. Remove nut (3), solenoid valve (2) and coil (1).

3. Check all of the O-ring seals for damage or wear. Replace as needed.

NOTE: Assemble in reverse order.

End By:

a. install vibratory control valve