Vibratory Arm
Usage:
Remove & Install Vibratory Arm
Start By;
a. remove drum
For illustration purposes only.
1. Attach a hoist to vibratory arm (2).
2. Remove four nuts (1) and vibratory arm (2). The weight of the vibratory arm is 41 kg (90 lb).
NOTE: The following steps are for the installation of the vibratory arm.
3. Using a hoist, install vibratory arm (2).
4. Install four nuts (2). Tighten to a torque of 100 ± 13 N·m (75 ± 10 lb ft).
End By;
a. install drum
Caterpillar Information System:
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Drum
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Vibratory Motor
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Scraper
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Leveling Blade Control Valve
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Blade Cylinder
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Blade
CB-434 VIBRATORY COMPACTOR HYDRAULIC SYSTEM Schematic
PR-450 PAVEMENT PROFILER ELECTRICAL DIAGRAMS Schematic
3408B ENGINE SUPPLEMENT FOR PR-450C COLD PLANER Water Temperature Regulator
3408B ENGINE SUPPLEMENT FOR PR-450C COLD PLANER Water Pump
3408B ENGINE SUPPLEMENT FOR PR-450C COLD PLANER Vibration Damper
3408B ENGINE SUPPLEMENT FOR PR-450C COLD PLANER Throttle Linkage
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Drum Motor
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Pivot Assembly
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Steering Cylinder
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Rops
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Steering Valve
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Flow Divider
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Brake Valve
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Vibratory Control Valve
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Steering Relief Valve
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Steering/Vibratory Pump
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Propel Pump
CP/CS-323 VIBRATORY COMPACTORS VEHICLE SYSTEMS Pump/Pump Drive