Usage:
NOTE: In the following procedure, the engine was remove from chassis for better photo illustration of the vee-belts.
1. Remove the access cover from the operators platform.
View From Under Operators Platform
2. Remove one socket head bolt (1) that holds the hydraulic lines, wiring harness and governor control cable to the bracket on the bottom side of the operators platform.
3. Remove ten bolts (2) and fan guards (3).
4. Loosen adjusting bolt (4). Move the alternator toward the engine to release the tension on vee-belts (5). Remove vee-belts (5) from the pulleys.
5. Loosen the tension on water pump drive belt (6). Remove water pump drive belt (6) from the pulleys.
NOTE: Install the vee-belts in the reverse order of removal. Adjust the tension on the vee-belts. See "Fan And Alternator Belts" in the Operation & Maintenance Manual.