1982/07/05 Caterpillar


Decal For Track Press Information Revised{0624,4169,4170,4175}

Usage:


Track Type Tractors And Loaders With Sealed And Lubricated Tracks

There has been a revision to the track information decal to show the latest recommendation of maximum pressure to be used when track on the above machines is assembled.

The decal, Form No. SEHS7039-02, can be ordered on the literature order form.

Caterpillar Information System:

1982/07/05 Service Parts Available For The 6V200 Hydraulic Wrench{0623}
1982/07/05 Information Available For The Installation Of Inserts In Cylinder Blocks And Spacer Plates{1217,1201,0664}
1982/07/05 New Crankshaft Wear Sleeve For Engines With Lip-Type Seals{1160,1161}
1982/07/05 Water Cooled Turbocharger Now Used{1052,1307,1380}
1982/07/05 Use Correct Torque To Prevent Broken Rocker Arm Shafts{1102}
1982/06/28 Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28 Explanation For "Notice" And "Warning" In Service Publications{0374,0375}
1982/06/28 Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28 6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/21 New Piston Group Has A Thicker Top Ring{1215,1214,1213,1225,1226,1227}
1982/06/21 Different Pipe Plug In Turbocharger Turbine Housing Prevents Contact With Oil Filter{1052,1318}
1982/06/21 Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings{1202,1203,1400,1405}
1982/07/12 New Gear Type Pump Primes Itself At Start-Up{3310,3314}
1982/07/12 New Main And Connecting Rod Bearings Have A Thicker Layer Of Lead-Tin Overlay (Surface Material){1230,1203,1219}
1982/07/12 Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge{1302,1316,1318}
1982/07/12 Caterpillar-Built Industrial Engines Available In New Machines{0371,1000}
1982/07/19 New Service Tools: 31 And 55 Ton Center Hole Hydraulic Cylinders And Relief Valve{0623}
1982/07/19 Oil Passage Plugs Are No Longer Installed In Crankshafts For Parts Service{1202}
1982/07/19 Torque Multiplier Changed To Prevent Lock Up Problems{0614}
1982/07/19 Analyzing A Major Engine Failure{1000}
1982/07/19 Predelivery Inspections{7588}
1982/07/19 Temporary Use Of Secondary Oil Filter Can Prevent Damage To Rebuilt Engines{1307,1318,1157}
1982/07/19 New Air Starting Motor Group Available{1451}
1982/07/19 Change Made To Fuel Nozzle Assembly; New Bleed Screw Used{1254}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.