Usage:
1. Disconnect wiring harness from front of magneto (2).
2. Remove mounting bolts (1) and remove magneto.
Install Magneto
1. Position magneto on engine and install mounting bolts. Time magneto to engine. See TIMING MAGNETO TO ENGINE in TESTING AND ADJUSTING.
2. Connect wiring harness to magneto.
Remove Magneto Drive
preparatory steps:
a) remove magneto
b) remove governor
1. Remove service meter (3).
2. Remove exhaust manifold water inlet line (2).
3. Remove magneto drive mounting nuts (5). Pull magneto drive (1) out to clear studs. Turn drive housing to the right to align recess in housing with oil cooler water outlet elbow (4). Remove magneto drive.
Install Magneto Drive
1. Position magneto drive (1) with recess in drive housing aligned with oil cooler water outlet elbow. Turn magneto drive to the left to align mounting studs. Install mounting nuts.
2. Install exhaust manifold water inlet line. Install service meter.
concluding steps:
a) install governor
b) install magneto