Starter
Usage:
Remove Starter
1. Disconnect ground wire (1) from starter.
2. Disconnect wiring (2) from starter solenoid.
3. Attach a hoist to the starter.
4. Remove the three starter mounting bolts. Remove the starter - weight 80 lbs. (36 kg).
Install Starter
1. Attach a hoist and position starter on engine.
2. Install starter mounting bolts.
3. Connect wiring to starter.
Caterpillar Information System:
D346 INDUSTRIAL ENGINE Turbocharger Lubrication Valve
D346 INDUSTRIAL ENGINE Water Pump
D346 INDUSTRIAL ENGINE Cylinder Liners
D346 INDUSTRIAL ENGINE Pistons
D346 INDUSTRIAL ENGINE Spacer Plates
D346 INDUSTRIAL ENGINE Left Cylinder Head Assembly
D346 INDUSTRIAL ENGINE Right Cylinder Head Assembly
D346 INDUSTRIAL ENGINE Left Camshaft Housing
D346 INDUSTRIAL ENGINE Right Camshaft Housing
D346 INDUSTRIAL ENGINE Precombustion Chambers
D346 INDUSTRIAL ENGINE Fuel Injection Valves
D346 INDUSTRIAL ENGINE Valve Covers
D346 INDUSTRIAL ENGINE Flywheel
D346 INDUSTRIAL ENGINE Crankshaft Rear Seal Ring & Thrower
D346 INDUSTRIAL ENGINE Flywheel Housing
D346 INDUSTRIAL ENGINE Rear Timing Gears & Plate
D346 INDUSTRIAL ENGINE Crankshaft
D346 Marine Engine Engine Oil Cooler Bypass Valve
D346 Marine Engine Engine And Marine Gear Oil Coolers
D346 Marine Engine Connecting Rod Bearings
D346 Marine Engine Oil Pan Base
D346 Marine Engine Oil Pump
D346 Marine Engine Crankshaft Main Bearings
D346 Marine Engine Piston Cooling Jets