Flywheel
Usage:
Remove Flywheel
1. Remove the four carrier-to-flywheel retaining bolts. Install two 5/8"-11NC forcing screws, and separate the carrier (1) from flywheel.
2. Install a 5/8" -11NC forged eyebolt in flywheel, and attach a hoist.
3. Remove the flywheel-to-crankshaft retaining bolts.
4. Remove the flywheel - weight 350 lbs. (160 kg).
Install Flywheel
1. Attach a hoist and position the flywheel on engine.
2. Install the flywheel retaining bolts, tighten the bolts to 640±80 lb. ft. (88,5±11,1 mkg).
3. Install the carrier and retaining bolts.
Caterpillar Information System:
D346 INDUSTRIAL ENGINE Starter
D346 INDUSTRIAL ENGINE Turbocharger Lubrication Valve
D346 INDUSTRIAL ENGINE Water Pump
D346 INDUSTRIAL ENGINE Cylinder Liners
D346 INDUSTRIAL ENGINE Pistons
D346 INDUSTRIAL ENGINE Spacer Plates
D346 INDUSTRIAL ENGINE Left Cylinder Head Assembly
D346 INDUSTRIAL ENGINE Right Cylinder Head Assembly
D346 INDUSTRIAL ENGINE Left Camshaft Housing
D346 INDUSTRIAL ENGINE Right Camshaft Housing
D346 INDUSTRIAL ENGINE Precombustion Chambers
D346 INDUSTRIAL ENGINE Fuel Injection Valves
D346 INDUSTRIAL ENGINE Crankshaft Rear Seal Ring & Thrower
D346 INDUSTRIAL ENGINE Flywheel Housing
D346 INDUSTRIAL ENGINE Rear Timing Gears & Plate
D346 INDUSTRIAL ENGINE Crankshaft
D346 Marine Engine Engine Oil Cooler Bypass Valve
D346 Marine Engine Engine And Marine Gear Oil Coolers
D346 Marine Engine Connecting Rod Bearings
D346 Marine Engine Oil Pan Base
D346 Marine Engine Oil Pump
D346 Marine Engine Crankshaft Main Bearings
D346 Marine Engine Piston Cooling Jets
D346 Marine Engine Alternator