Valve Covers
Usage:
Remove Valve Covers
1. Loosen the crankcase breather pipe hose clamp (left valve cover only).
2. Remove the valve cover mounting bolts. Remove the valve cover.
Install Valve Covers
1. Install a new valve cover seal if necessary.
NOTE: When installing new seal, cut the seal to provide a minimum of 1 in. (2,5 mm) overlap.
2. Position the valve cover on engine, and install mounting bolts.
3. Tighten the crankcase breather pipe hose clamp.
Caterpillar Information System:
D346 INDUSTRIAL ENGINE Aftercooler Cores
D346 INDUSTRIAL ENGINE Turbochargers
D346 INDUSTRIAL ENGINE Air Cleaner Housings
D346 INDUSTRIAL ENGINE Exhaust Manifolds
D346 INDUSTRIAL ENGINE Fuel Injection Pump Housing
D346 INDUSTRIAL ENGINE Variable Timing Unit
D346 INDUSTRIAL ENGINE Governor
D346 INDUSTRIAL ENGINE Fuel Ratio Control With Override
D346 INDUSTRIAL ENGINE Safety Shutoff Control
D346 INDUSTRIAL ENGINE Fuel Injection Lines
D346 INDUSTRIAL ENGINE Fuel Transfer Pump
D346 INDUSTRIAL ENGINE Front Timing Gear Plate And Camshaft Drive Idler Gear
D346 INDUSTRIAL ENGINE Fuel Injection Valves
D346 INDUSTRIAL ENGINE Precombustion Chambers
D346 INDUSTRIAL ENGINE Right Camshaft Housing
D346 INDUSTRIAL ENGINE Left Camshaft Housing
D346 INDUSTRIAL ENGINE Right Cylinder Head Assembly
D346 INDUSTRIAL ENGINE Left Cylinder Head Assembly
D346 INDUSTRIAL ENGINE Spacer Plates
D346 INDUSTRIAL ENGINE Pistons
D346 INDUSTRIAL ENGINE Cylinder Liners
D346 INDUSTRIAL ENGINE Water Pump
D346 INDUSTRIAL ENGINE Turbocharger Lubrication Valve
D346 INDUSTRIAL ENGINE Starter