Fuel Injection Valves
Usage:
Remove Fuel Injection Valves
preparatory step:
a) remove valve covers
1. Remove the inner fuel injection line (1).
2. Remove the fuel injection valve retaining nut (2).
3. Remove the fuel injection valve assembly from precombustion chamber. Remove the nozzle from body.
Install Fuel Injection Valves
1. Install the fuel injection valve nozzle (2) finger tight on the body (1). Install the valve assembly into the precombustion chamber.
2. Install the nozzle retaining nut, and tighten nut to an initial torque of 85±5 lb. ft. (11,8±0,7 mkg). Hand tighten retaining nut to a final torque of 105±5 lb. ft. (14,52±0,7 mkg).
3. Install the inner fuel injection line. Tighten retaining nuts to 30±5 lb. ft. (4,1±0,7 mkg).
concluding step:
a) install valve covers
Caterpillar Information System:
D346 INDUSTRIAL ENGINE Valve Covers
D346 INDUSTRIAL ENGINE Aftercooler Cores
D346 INDUSTRIAL ENGINE Turbochargers
D346 INDUSTRIAL ENGINE Air Cleaner Housings
D346 INDUSTRIAL ENGINE Exhaust Manifolds
D346 INDUSTRIAL ENGINE Fuel Injection Pump Housing
D346 INDUSTRIAL ENGINE Variable Timing Unit
D346 INDUSTRIAL ENGINE Governor
D346 INDUSTRIAL ENGINE Fuel Ratio Control With Override
D346 INDUSTRIAL ENGINE Safety Shutoff Control
D346 INDUSTRIAL ENGINE Fuel Injection Lines
D346 INDUSTRIAL ENGINE Fuel Transfer Pump
D346 INDUSTRIAL ENGINE Precombustion Chambers
D346 INDUSTRIAL ENGINE Right Camshaft Housing
D346 INDUSTRIAL ENGINE Left Camshaft Housing
D346 INDUSTRIAL ENGINE Right Cylinder Head Assembly
D346 INDUSTRIAL ENGINE Left Cylinder Head Assembly
D346 INDUSTRIAL ENGINE Spacer Plates
D346 INDUSTRIAL ENGINE Pistons
D346 INDUSTRIAL ENGINE Cylinder Liners
D346 INDUSTRIAL ENGINE Water Pump
D346 INDUSTRIAL ENGINE Turbocharger Lubrication Valve
D346 INDUSTRIAL ENGINE Starter
D346 INDUSTRIAL ENGINE Flywheel