Improved Fuel Sender Assembly Available {7481}
Usage:
IT38F (6FN, 5DR) Integrated Toolcarriers;
938F (1KM, 2RM, 7SN, 8SM, 8YN) Wheel Loaders
Description of Change: The fuel sender has internal improvements to provide increased reliability.
Adaptable To: The improved 137-8745 Fuel Level Sender Assembly is a direct replacement for the former 106-3535 Fuel Level Sender Assembly. The improved 137-8745 Fuel Level Sender Assembly is adaptable to IT38F (6FN1-438, 5DR1-267) Integrated Toolcarriers; and 938F (1KM1-1799, 2RM1-1123, 7SN1-293, 8SM1-600, 8YN1-69) Wheel Loaders. The 106-3535 Fuel Level Sender Assembly will no longer be serviced.
Caterpillar Information System:
1996/12/16 Cab Air Conditioner Group Improvements Eliminate Debris {7320}
1996/12/16 Longer Tie Rods For Control Valve Groups {5051,5124}
1996/12/16 Cab Improvements Reduce Vibration {7266}
1996/12/16 Spring Force Adjustment Allows Hydraulic Levers To Remain In Detent Position {5051}
1996/12/16 Sprocket Segments Can Be Reworked To Allow Proper Torque {4155}
1996/12/16 Speed And Direction Lever Improvements Prevent Seizing {1901}
1996/12/16 Improved Design Of Decking Blade And Trunnion Caps Provide Increased Service Life {6060,6069}
1996/12/16 Improved Relay Switch Assembly Used To Provide Increased Reliability {1423}
1996/12/16 Front Track Roller Improvement Strengthens Weld Joint {4151}
1996/12/09 Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/09 124-9057 Guide (Swirl) Collar Quickly Installs Valve Guides To Proper Height{1104,0701}
1996/12/09 Use 6V-7920 Spanner Wrench To Remove And Install 5P-5813 Pinion Nut{3254,4056,0602}
1996/12/23 Longer Bosses Increase Blade Assembly Service Life{5057,6060,6051,6071,7167}
1996/12/23 Service Procedures For Special Application Rollers And Idlers Summarized For Track-Type Troctors{4159,4180}
1996/12/23 Rear Axle Oil Level Raised To Improve Axle Lubrication{3013}
1996/12/23 Grapple Rotator Motor Joint Strengthened{5082,6307}
1996/12/23 Cab Heater Efficiency Improved{7304}
1996/12/23 Externally Adjusted Relief Valve Used In Steering Control Valve Group{4307,4322}
1996/12/23 Larger Washer Used With Tube Clamps On Hydrostatic Transmission Prevents Clamp From Loosening{3218}
1996/12/23 New Temperature Sensors Used Which Prevent False Over Temperature Warnings{1906,1400}
1996/12/23 Ride Control Accumulator Recharging Procedure Changed{5081,5077}
1996/12/23 New Sight Gauge Replaces Former Dip Stick For Improved Visibility Of The Front Implement Hydraulic Tank Oil Level{7479}
1996/12/23 New Rotocoil Assembly Used In Engine Cylinder Head Groups{1109}
1996/12/30 Wiring Harness Routing Changed To Increase Wire Harness Service Life {1408}