MID 018 - CID 0550 - FMI 02 Noisy or Loss of Oxygen Signal
产生此代码的情况:
发动机正在运转或氧气传感器正被标定。 氧气缓冲器的信号出故障。
系统响应:
如果发动机正在运转，燃料作动器将会移动到缺省位置。 如果氧气传感器正被标定，标定将被终止。
该诊断代码可以在数字诊断工具(DDT)、发动机控制模块(ECM)或卡特彼勒电子技师(Cat ET)上查看到。
发动机性能和排放都将受到影响。
测试步骤 1. 进行以下的诊断步骤: 氧气传感器信号
结果:
- OK - 停止
Caterpillar Information System:
G3520C and G3520E Generator Set Engines Crankshaft - Install
G3520C and G3520E Generator Set Engines Crankshaft - Remove
2003/06/01 Removal of Elbow Improves the Reliability of the Cooling System in an Industrial Application {1380}
XQP60 and XQP100 Rental Generator Sets Fuel System - Prime
3500B Series II Marine Engines Direct Fuel Control Mode
3500B Series II Marine Engines Engine Speed/Timing Sensor - Calibrate
C3.3 Industrial Engine Cold Weather Starting
2003/06/01 New Waterproof Covers for Magnetos are Used {1552}
C7 On-highway Engine Turbocharger
C4.4 Generator Sets Engine Stopping
XQP60 and XQP100 Rental Generator Sets Model View Illustrations
C15 On-highway Engine Turbocharger - Install - High Pressure
C3.3 Industrial Engine Engine Warm-up
G3304 and G3306 Engines Cylinder Liner - Install
G3500 Engines MID 018 - CID 0523 - FMI 11 No A/F Ratio Engine Speed Sensor **Shutdown**
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
C11, C13 and C15 On-highway Engines 0105-03 Intake Manifold Air Temperature voltage high (38)
C11, C13 and C15 On-highway Engines 0105-04 Intake Manifold Air Temperature voltage low (38)
G3304 and G3306 Engines Camshaft Bearings - Remove
G3304 and G3306 Engines Camshaft Bearings - Install
3406C Marine Auxiliary Generator Set Plate Locations and Film Locations
G3304 and G3306 Engines Crankshaft - Remove
3500 Engines Fuel Filter Housing - Remove
3500 Engines Fuel Filter Housing - Install