New Waterproof Covers for Magnetos are Used {1552}
- Engines:
- G3304 (S/N: 37Y1-UP)
- Irrigation:
- G3406 (S/N: 4FD1-UP)
- G3306 (S/N: 07Y1-UP)
Description of Change: The covers for the magnetos have been changed for all of the above engines. The timing windows on the rear covers of the magnetos are sealed better in order to prevent liquid from entering the magneto. The new covers are direct replacements for the former covers, which are cancelled. The part numbers of the magnetos have not changed but the part numbers of the covers are different.
Adaptable To: The new covers are used with the above engines on the magnetos that are listed in Table 1.
Show/hide table
New Covers for Magnetos     | |||
Engine Model     | Magneto     | Former Rear Cover     | New Rear Cover     |
G3304     | 6I-2611     | 9Y-6460     | 239-7605     |
6I-2310 | 2W-6033     | 239-7604     | |
G3306     | 9Y-6465     | 9Y-6464     | 239-7606     |
2W-3749 | 2W-5954     | 239-7602     | |
G3406     | 109-8912     | 9Y-6464     | 239-7603     |
Caterpillar Information System:
C7 On-highway Engine Turbocharger
C4.4 Generator Sets Engine Stopping
XQP60 and XQP100 Rental Generator Sets Model View Illustrations
C15 On-highway Engine Turbocharger - Install - High Pressure
C15 On-highway Engine Turbocharger - Remove - High Pressure
C7 On-highway Engine Belt Tensioner - If Equipped
G3304 and G3306 Engines Cylinder Liner - Remove
C15 On-highway Engine Turbocharger - Install - Low Pressure
C15 On-highway Engine Turbocharger - Remove - Low Pressure
C1.5 and C2.2 Generator Set Engines Crankshaft - Remove
3512C and 3516C Marine Auxiliary and Generator Set Engines Engine Oil Sample - Obtain
C7 On-highway Engine Gear Group (Front)
C3.3 Industrial Engine Cold Weather Starting
3500B Series II Marine Engines Engine Speed/Timing Sensor - Calibrate
3500B Series II Marine Engines Direct Fuel Control Mode
XQP60 and XQP100 Rental Generator Sets Fuel System - Prime
2003/06/01 Removal of Elbow Improves the Reliability of the Cooling System in an Industrial Application {1380}
G3520C and G3520E Generator Set Engines Crankshaft - Remove
G3520C and G3520E Generator Set Engines Crankshaft - Install
G3500 Engines MID 018 - CID 0550 - FMI 02 Noisy or Loss of Oxygen Signal
C3.3 Industrial Engine Engine Warm-up
G3304 and G3306 Engines Cylinder Liner - Install
G3500 Engines MID 018 - CID 0523 - FMI 11 No A/F Ratio Engine Speed Sensor **Shutdown**
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}