3500 Engines Caterpillar


Fuel Filter Housing - Install

Usage:

3516C 9F4

安装步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。




    图 1g01050834

  1. 将适当起吊设备连在燃油滤清器壳体 (4) 上。 燃油滤清器壳体 (4) 的重量约为 30 kg (66 lb)。 定位燃油滤清器壳体 (4) 并安装螺栓 (5)。

  2. 连接管组件 (6)。


    图 2g01050833

  3. 安装盖 (1)。

  4. 连接软管组件 (3)。

  5. 连接燃油压力传感器 (2)。

  6. 对发动机供油。

  7. 向燃油系统充油。 请参阅操作和保养手册, "燃油系统 - 充油"。

Caterpillar Information System:

3500 Engines Fuel Filter Housing - Remove
G3304 and G3306 Engines Crankshaft - Remove
3406C Marine Auxiliary Generator Set Plate Locations and Film Locations
G3304 and G3306 Engines Camshaft Bearings - Install
G3304 and G3306 Engines Camshaft Bearings - Remove
C11, C13 and C15 On-highway Engines 0105-04 Intake Manifold Air Temperature voltage low (38)
C11, C13 and C15 On-highway Engines 0105-03 Intake Manifold Air Temperature voltage high (38)
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
G3500 Engines MID 018 - CID 0523 - FMI 11 No A/F Ratio Engine Speed Sensor **Shutdown**
G3304 and G3306 Engines Cylinder Liner - Install
C3.3 Industrial Engine Engine Warm-up
G3500 Engines MID 018 - CID 0550 - FMI 02 Noisy or Loss of Oxygen Signal
G3304 and G3306 Engines Crankshaft - Install
G3520C and G3520E Generator Set Engines Piston and Connecting Rods - Remove
G3520C and G3520E Generator Set Engines Piston and Connecting Rods - Install
2003/06/01 Improved Radiator for the Generator Set Engine {1353}
G3500 Engines MID 018 - CID 0551 - FMI 01 Oxygen Sensor not connected to buffer
G3500 Engines MID 018 - CID 0552 - FMI 11 Engine Speed present during an O2 calibration
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Bypass Valve - Remove and Install
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Flywheel Telemetry - Calibrate
G3520C and G3520E Generator Set Engines Cylinder Liner - Install
3508C, 3512C and 3516C Marine Engines Camshaft Bearings - Remove
Replacing the Convection Jacket Water Heaters with a Recirculating Jacket Water Heater on 3500 Engines{1383} Replacing the Convection Jacket Water Heaters with a Recirculating Jacket Water Heater on 3500 Engines{1383}
3508C, 3512C and 3516C Marine Engines Camshaft Bearings - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.