- Engine:
- 3516B (S/N: 7RN1-UP)
Through development, the reliability of the cooling system for certain industrial engines was improved by the removal of an elbow. The modification was validated at a significant site of a Caterpillar customer.
This modification is approved only for the above engines in industrial applications that have the 162-7667 Engine Arrangement .
Note: The modification simulates the routing of the jacket water for the 3516B Industrial Engine ( (S/N: CAN)).
The following modification to the cooling system is optional.
Removal of Parts
For the modification, the parts that are identified in Illustration 1 are removed.
Illustration 1 | g01003748 |
(1) 2A-4639 Bolt (2) 5M-2894 Hard Washer (3) 8N-0386 Flange (4) 4N-1320 Adapter Gasket (5) 1A-2029 Bolt (6) 1N-4087 Elbow (7) 6V-5066 O-Ring Seal (8) 6V-1454 O-Ring Seal (9) 8N-1989 Tube (10) 141-9285 Elbow (11) 1A-9066 Gasket |
Installed Parts
To cover the openings, the parts that are identified in Illustration 1 and in Table 1 are installed.
Illustration 2 | g01003749 |
Required Parts for the Modification     | ||
Callout     | Part     | Qty     |
(1)     | 4N-1320 Adapter Gasket     | 1     |
(2)     | 115-7848 Cover Plate     | 1     |
(3)     | 5M-2894 Hard Washer     | 4     |
(4)     | 0S-1594 Bolt     | 4     |
(5)     | 1A-9066 Gasket     | 1     |
(6)     | 116-3258 Cover     | 1     |
(7)     | 0T-0065 Bolt     | 2     |