Plate Locations and Film Locations
发动机识别
卡特彼勒发动机由序列号、性能规格号和配置总成号来识别。 在某些情况下,也使用更改号。 这些号码显示在安装在发动机上的序列号标牌和信息资料标牌上。
卡特彼勒代理商需要这些号码以便确定该发动机上包括的部件。 这样可以准确识别需要更换零件的零件号。
序列号标牌
发动机序列号标牌位于缸体左侧靠近发动机后部的地方。
Show/hide table
图 1 | g01003863 |
(1) 发动机序列号标牌 |
以下信息资料压印在序列号标牌上: 发动机序列号, 机型 和 总成配置号。
信息资料标牌
信息资料牌位于后气门室盖的右侧。
Show/hide table
图 2 | g01004017 |
(2) 发动机信息资料标牌 |
以下信息资料压印在信息资料标牌上: 压缩比, 后冷器温度, 功率(千瓦和马力), 满负荷转速 和 其它信息资料。
发电机识别
发电机识别和信息资料标牌位于发电机筒体上。
Show/hide table
图 3 | g01004070 |
(3) 发电机识别标牌 (4) 发电机序列号标牌 |
当需要进行维修时,就会用到该标牌上给出的信息资料。 发电机识别和信息资料标牌包括小数信息资料: 序列号, 型号 和 发电机组额定值。 发电机组包括发动机和发电机。 该标牌还包括了所有有关的发电机数据,以提供订购零件时必要的信息资料。
Caterpillar Information System:
G3304 and G3306 Engines Camshaft Bearings - Install
G3304 and G3306 Engines Camshaft Bearings - Remove
C11, C13 and C15 On-highway Engines 0105-04 Intake Manifold Air Temperature voltage low (38)
C11, C13 and C15 On-highway Engines 0105-03 Intake Manifold Air Temperature voltage high (38)
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
G3500 Engines MID 018 - CID 0523 - FMI 11 No A/F Ratio Engine Speed Sensor **Shutdown**
G3304 and G3306 Engines Cylinder Liner - Install
C3.3 Industrial Engine Engine Warm-up
G3500 Engines MID 018 - CID 0550 - FMI 02 Noisy or Loss of Oxygen Signal
G3520C and G3520E Generator Set Engines Crankshaft - Install
G3520C and G3520E Generator Set Engines Crankshaft - Remove
2003/06/01 Removal of Elbow Improves the Reliability of the Cooling System in an Industrial Application {1380}
G3304 and G3306 Engines Crankshaft - Remove
3500 Engines Fuel Filter Housing - Remove
3500 Engines Fuel Filter Housing - Install
G3304 and G3306 Engines Crankshaft - Install
G3520C and G3520E Generator Set Engines Piston and Connecting Rods - Remove
G3520C and G3520E Generator Set Engines Piston and Connecting Rods - Install
2003/06/01 Improved Radiator for the Generator Set Engine {1353}
G3500 Engines MID 018 - CID 0551 - FMI 01 Oxygen Sensor not connected to buffer
G3500 Engines MID 018 - CID 0552 - FMI 11 Engine Speed present during an O2 calibration
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Bypass Valve - Remove and Install
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Flywheel Telemetry - Calibrate
G3520C and G3520E Generator Set Engines Cylinder Liner - Install