Required Tools | |||
Tooling | Part Number | Description | Qty |
A | 8S-2241 | Camshaft Bearing Tool Group | 1 |
8H-0684 | Ratchet Wrench | 1 |
- Use Tool (A) to install the camshaft bearings in the 3304B and 3306B cylinder block.
Note: The camshaft bearings in the 3304B have pressure lubrication. The intermediate camshaft bearings and the rear camshaft bearings in the 3306B have splash lubrication.
- Install the camshaft bearings in the 3304B cylinder block, as follows:
(a) Install the front bearing to a depth of
0.5 ± 0.5 mm (0.02 ± 0.02 inch) . Ensure that the oil holes are in a horizontal position and that the camshaft bearing joint is at the top of the engine. The camshaft bearing joint cannot be more than 15° degrees from vertical in either direction.(b) Install the center bearing to a depth of
303.2 ± 0.5 mm (11.94 ± 0.02 inch) . Ensure that the oil holes in the camshaft bearing are in alignment with the oil holes in the cylinder block.(c) Install the rear bearing to a depth of
604.9 ± 0.5 mm (23.81 ± 0.02 inch) . Ensure that the oil holes in the camshaft bearing are in alignment with the oil holes in the cylinder block.
Illustration 1 | g00478567 |
- Install the camshaft bearings in the 3306B cylinder block, as follows:
- Install front bearing (B) to a depth of
0.5 ± 0.5 mm (.02 ± .02 inch) . Ensure that the oil holes are in a horizontal position and that the camshaft bearing joint is at the top of the engine. The camshaft bearing joint cannot be more than 15 degrees from the vertical position in either direction. - Install the remainder of the bearings. Install the bearings to the dimensions that are given from the front face of the cylinder block: (C)
154.0 ± 0.5 mm (6.06 ± .02 inch) , (D)303.2 ± 0.5 mm (11.94 ± .02 inch) , (E)601.7 ± 0.5 mm (23.69 ± .02 inch) and (F)903.4 ± 0.5 mm (35.57 ± .02 inch) .
Illustration 2 | g00478822 |
End By:
- Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Install" for the engine that is being serviced.
- Install the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing - Install" for the engine that is being serviced.
- Install the timing gear plate. Refer to Disassembly and Assembly, "Timing Gear Plate - Remove and Install" for the engine that is being serviced.
- Install the oil pan plate. Refer to Disassembly and Assembly, "Oil Pan Plate - Remove and Install" for the engine that is being serviced.