365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Caterpillar

Installation Procedure

Note: The procedure to install the right hand final drive and the procedure to install the left hand final drive is identical. The procedure that follows is for one of the final drives.

Show/hide table



Illustration 1	g00595681

1. Attach two lifting straps and a hoist to final drive (1). The approximate weight of the final drive is 812 kg (1790 lb). It may be necessary to adjust the lifting straps for correct balance of the final drive. Position final drive (1) on the track roller frame, as shown.

   Note: The weight of the final drive must be adjusted if any other components are being installed with the final drive.

Show/hide table



Illustration 2	g00594077

Show/hide table



Illustration 3	g00595694

Note: Make sure that mounting holes (a) for the travel motor are aligned, as shown. This is necessary for the correct installation of the travel motor.

2. Use 9S-3263 Thread Lock Compound on bolts (2). Install the washers and bolts (2). Use Tooling (A) to tighten bolts (2) to a torque of 1800 ± 200 N·m (1328 ± 148 lb ft).

End By:

1. Install the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Install" in this manual.
2. Install the final drive sprocket. Refer to Disassembly and Assembly, "Final Drive Sprocket - Remove and Install" in this manual.