365B Excavator Caterpillar

Illustration 1	g00572243

Key for Main Menu - Access the main menu in order to modify the following settings:

• Adjust the contrast.

• Adjust the backlight.

• Select the units.

• Select the language.

• Display a history of errors that have occurred.

• Display properties of the machine.

• Test the display.

• Set the clock.

Note: If all of the information on this screen is not displayed, press the more key in order to view the rest of the screen. The text will return to the original position after a few seconds.

Table 1

		MAIN MENU
	1:	PREFERENCES MENU
	2:	EVENT MENU
	3:	SYSTEM MENU
	4:	SERVICE OPTIONS

Table 1 shows an example of the main menu.

Use the numeric keypad or use the backward key and the forward key in order to select an option.

Press the cancel key in order to exit the main menu and return to the default display.

"Preferences Menu"

Adjust the Contrast

Table 2

		PREFERENCES MENU
	1:	ADJUST CONTRAST
	2:	ADJUST BACKLIGHT
	3:	SELECT UNITS
	4:	SELECT LANGUAGE

This option can be accessed by using the following two methods:

• From the default display, press numeric key "1" on the keypad.

• Press the key for the main menu. Select the "preference menu" and then select "adjust contrast".

Table 3

	ADJUST CONTRAST
	<------------>
	55%

Use the keypad in order to adjust the contrast.

Increase Contrast - Push this key in order to increase the contrast by 5 percent.

Decrease Contrast - Push this key in order to decrease the contrast by 5 percent.

Validate New Setting - Push this key in order to accept the value that is displayed on the screen. After the value has been accepted, a message will appear in order to verify the selection.

Cancel Selection - Push this key in order to cancel the selection and return the default display.

Adjust the Backlight

Table 4

		PREFERENCES MENU
	1:	ADJUST CONTRAST
	2:	ADJUST BACKLIGHT
	3:	SELECT UNITS
	4:	SELECT LANGUAGE

This option can be accessed by using the following two methods:

• From the default display, press numeric key "4" on the keypad.

• Press the key for the main menu. Select the "preference menu" and then select "adjust backlight".

Table 5

	ADJUST BACKLIGHT
	<------------>
	55%

Use the keypad in order to adjust the backlight.

Increase the Backlight - Push this key in order to increase the backlight by 5 percent.

Decrease the Backlight - Push this key in order to decrease the backlight by 5 percent.

Validate New Setting - Push this key in order to accept the value that is displayed on the screen. After the value has been accepted, a message will appear in order to verify the selection.

Cancel Selection - Push this key in order to cancel the selection and return the default display.

Select Units

Table 6

		PREFERENCES MENU
	1:	ADJUST CONTRAST
	2:	ADJUST BACKLIGHT
	3:	SELECT UNITS
	4:	SELECT LANGUAGE

Select option "3" from the "preferences menu".

Table 7

	SELECT UNITS
	ENGLISH
	METRIC

Select the Unit - Use the backward key or use the forward key in order to select the type of units.

Validate New Setting - Push this key in order to accept the setting.

Cancel Selection - Push this key in order to cancel the selection and return the default display.

Selecting a Language

Table 8

		PREFERENCES MENU
	1:	ADJUST CONTRAST
	2:	ADJUST BACKLIGHT
	3:	SELECT UNITS
	4:	SELECT LANGUAGE

Select option "4" from the "preferences menu".

Table 9

	SELECT LANGUAGE
	ENGLISH

This menu allows the operator to select the language that will be displayed.

The current language is shown when the menu is accessed.

The languages are in alphabetical order.

Select a Language - Use the backward key or use the forward key in order to select a language.

Accept a Language - Push this key in order to accept the new language.

Cancel Selection - Push this key in order to cancel the selection and return the default display.

"Event Menu"

"Active Events"

Table 10

		EVENT MENU
	1:	ACTIVE EVENTS
	2:	SUMMARY LOG
	3:	CHRONOLOGICAL LOG
	4:	EVENT STATS
	5:	CLEAR ALL

Select option "1" from the "event menu".

Table 11

	EVENT ACK REPORT
	ALTERNATOR STAT NOT
	CHARGING (1)
	000030.6 (2)	001:40:25 (3)	2 (4)

( 1 )	Description of the error
( 2 )	Engine hours
( 3 )	Time of the error
( 4 )	Warning category

This display lists the current errors on the machine.

Scroll through the Log - Push the backward key or push the forward key in order to scroll through the log.

Cancel Selection - Push this key in order to return the default display.

"Summary Log"

Table 12

		EVENT MENU
	1:	ACTIVE EVENTS
	2:	SUMMARY LOG
	3:	CHRONOLOGICAL LOG
	4:	EVENT STATS
	5:	CLEAR ALL

Select option "2" from the "event menu".

Table 13

	SUMMARY LOG
	GAUGE CLUSTER ERROR (1)
	F12345 (2)	L67890 (3)	C123 (4)	1 (5)

( 1 )	Description of the error
( 2 )	First occurrence of the error
( 3 )	Last occurrence of the error
( 4 )	Quantity of errors that happened
( 5 )	Warning category

This display shows a summary of all of the errors that have happened on the machine. For example, Table 13 shows that an error has occurred with the gauge cluster. The error first occurred when the engine had "12345" hours. The error last occurred when the engine had "67890" hours. The error had "123" occurrences and the error has a warning category of "1".

Use the keypad to scroll through the "summary log".

Scroll through the Log - Push the backward key or push the forward key in order to scroll through the log.

Cancel Selection - Push this key in order to return the default display.

"Chronological Log"

Table 14

		EVENT MENU
	1:	ACTIVE EVENTS
	2:	SUMMARY LOG
	3:	CHRONOLOGICAL LOG
	4:	EVENT STATS
	5:	CLEAR ALL

Select option "3" from the "event menu".

Table 15

	CHRONOLOGICAL LOG
	ALTERNATOR STAT NOT
	CHARGING (1)
	000030.6 (2)	001:40:25 (3)	2 (4)

( 1 )	Description of error
( 2 )	Engine hours
( 3 )	Time of the error
( 4 )	Warning category

This display lists the errors in the order of occurrence.

Scroll through the Log - Push the backward key or push the forward key in order to scroll through the log.

Cancel Selection - Push this key in order to return the default display.

"Event Stats"

Table 16

		EVENT MENU
	1:	ACTIVE EVENTS
	2:	SUMMARY LOG
	3:	CHRONOLOGICAL LOG
	4:	EVENT STATS
	5:	CLEAR ALL

Select option "4" from the "event menu".

Table 17

	EVENT STATS
	DATA EVENTS (1)		1 (2)

( 1 )	Type of event
( 2 )	Quantity of errors for each event

"Data Events" - Show the number of nonfunctional events that have occurred on the machine. Examples of "data events" are hydraulic oil temperature and fuel temperature.

"System Events" - Show the number of functional events that have occurred on the machine. Examples of "system events" are errors for solenoids and errors for gauges.

"Category 3" - Show the number of warnings that have occurred in this warning category. Refer to Operation and Maintenance Manual, "Monitoring System" for information on warning categories.

"Category 2" - Show the number of warnings that have occurred in this warning category. Refer to Operation and Maintenance Manual, "Monitoring System" for information on warning categories.

"Category 1" - Show the number of warnings that have occurred in this warning category. Refer to Operation and Maintenance Manual, "Monitoring System" for information on warning categories.

"Clear All"

Table 18

		EVENT MENU
	1:	ACTIVE EVENTS
	2:	SUMMARY LOG
	3:	CHRONOLOGICAL LOG
	4:	EVENT STATS
	5:	CLEAR ALL

Select option "5" from the "event menu".

Selecting "clear all" from the menu will clear all of the logs from the machine if the service mode is active.

For further information, consult your Caterpillar dealer.

"System Menu"

"Show Machine Stat"

Table 19

		SYSTEM MENU
	1:	SHOW MACHINE STAT
	2:	TEST DISPLAY
	3:	AUTOLUBE MENU

Select option "1" from the "system menu".

Table 20

	MACHINE STAT MENU
	S: 1586275.25 (1)
	C: 1648213.04 (2)

( 1 )	Version of software of the controller
( 2 )	Configuration of the machine

Scroll - Push the backward key or push the forward key in order to scroll through the information for the machine.

• "ECM SERIAL NO"

• "ECM PART NO"

• "MODEL NO"

• "SERIAL NO"

• "EQUIPMENT ID"

• "HARNESS CODE VALUE"

• "OPERATOR SELECTED"

Cancel - Push this key in order to return the default display.

"Test Display"

Table 21

	SYSTEM MENU
	1:	SHOW MACHINE STAT
	2:	TEST DISPLAY
	3:	AUTOLUBE MENU

Select option "2" from the "system menu".

Press the OK key in order to test all of the gauges, alarm lights, status lights, and the display screen.

Note: This test is also performed automatically when the engine start switch is turned to the START position.

"Autolube Menu" (If Equipped)

Table 22

		AUTOLUBE MENU
	1:	ADJUST CYCLE TIME
	2:	ADJUST LUBE TIME

This menu allows the mechanic to set the automatic lubrication system. This menu also allows the mechanic to modify the settings of the autolube system.

Refer to Operation and Maintenance Manual, "Automatic Lubrication System Control" for more information.

"Service Options"

"Start Manual Lube" (If Equipped)

Table 23

		SERVICE OPTIONS
	1:	START MANUAL LUBE
	2:	PERFORM CALIBRATION

Select option "1" from "service options".

Press the OK key in order to bypass the automatic lubrication system (if equipped) and grease on demand.

"Perform Calibration"

There are many options that are listed in this menu. However, only the following options are available to the operator:

• Set the clock. For the procedure on setting the clock, refer to Operation and Maintenance Manual, "Clock".

• Select the active program for the tool.

• Select the gain/response settings. Refer to Operation and Maintenance Manual, "Gain/Response Control" for more information.