Circuit Breakers - Reset
Open the engine access panel. The circuit breaker box is located behind the engine access panel.
Show/hide table
 | |
| Illustration 1 | g01513930 |
Show/hide table
| Circuit Breaker Reset - Push in the button in order to reset the circuit breaker. If the electrical system is working properly, the button will remain depressed. If the button does not remain depressed, check the appropriate electrical circuit. Repair the electrical circuit, if necessary. |
(1) Circuit for the engine start ... 50 amp
(2) Circuit for the cab arrangement ... 80 amp
(3) Circuit for the Air Inlet Heater ... 90 amp
(4) Circuit for the tilt hood ... 90 amp
(5) Circuit for the Electrical Accessories ... 105 amp
(6) Circuit for the Engine ECM ... 30 amp
(7) Backup circuit (power) ... 30 amp
Caterpillar Information System:
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Stick Cylinder
C4.4 and C6.6 Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
Swivel Seat Supplement for the R2900G (XTRA) Load Haul Dump {1000, 7000, 7324} Swivel Seat Supplement for the R2900G (XTRA) Load Haul Dump {1000, 7000, 7324}
2008/05/05 New AccuGrade® Firmware is Now Available {7220, 7620}
2290, 2390, 2391 and 2491 Track Feller Bunchers Capacities (Refill)
AP600D and BG600D Asphalt Pavers Machine Systems Solenoid Valve (Left Conveyor) - Calibrate
AP600D and BG600D Asphalt Pavers Machine Systems Conveyor Chain (Drag) - Check and Adjust
AP600D and BG600D Asphalt Pavers Machine Systems Conveyor Drive Chain (Drag) - Check and Adjust
AP600D and BG600D Asphalt Pavers Machine Systems Conveyor Drive Chain (Auger) - Check and Adjust
Assembly Procedure for the Mine Specific Design (MSD II) Truck Body {7258, 7960} Assembly Procedure for the Mine Specific Design (MSD II) Truck Body {7258, 7960}
3512C Engine for Caterpillar Built Machines Crankshaft - Install
3512C Engine for Caterpillar Built Machines Crankshaft - Remove
3512C Engine for Caterpillar Built Machines Air Compressor - Remove and Install
AP600D and BG600D Asphalt Pavers Machine Systems Solenoid Valve (Right Conveyor) - Calibrate
Procedure to Install Automotive Fuses{1408, 1417, 7278} Procedure to Install Automotive Fuses{1408, 1417, 7278}
AP600D and BG600D Asphalt Pavers Machine Systems Sensor (Paddle) - Calibrate
AP600D and BG600D Asphalt Pavers Machine Systems Solenoid Valve (Vibratory Motor) - Calibrate
2008/08/18 The Sensor Wiring Group is Updated {1408}
2008/05/26 An Updated Hose is now Used in the Water Lines Groups {1380}
AP600D and BG600D Asphalt Pavers Machine Systems Manifold Valve (Screed Extend)
AP600D and BG600D Asphalt Pavers Machine Systems Control Manifold (Auxiliary)
AP600D and BG600D Asphalt Pavers Machine Systems Electrical System (Auxiliary Hydraulic)
AP600D and BG600D Asphalt Pavers Machine Systems Electrical Schematic (Auxiliary Hydraulic System)
3512C Engine for Caterpillar Built Machines Engine Trunnion - Remove and Install