PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE MOUNTING GROUP BRACKET BOLTS ON CERTAIN M314F, M315F, M316F, M317F, AND M323F EXCAVATORS
Usage:
TEBE8514-00
Show/hide table
| 12Dec2018 |
U-706
A-512
D-624
O-620
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE MOUNTING GROUP BRACKET BOLTS ON CERTAIN M314F, M315F, M316F, M317F, AND M323F EXCAVATORS |
|
| 1152 | PS53930 |
|
Show/hide table
| NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS53930" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Dec2021 |
PROBLEM
Show/hide table
| The existing 482-9800 Engine Mounting Group bracket bolts can become loose on certain M314F, M315F, M316F, M317F, and M323F Excavators. If the existing front engine bracket bolts become loose, it can result in engine oil leakage around the engine front brackets threads, or create excessive engine vibration. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| M314F | F4A00253-00663 FB400222-00837 |
| M315F | F4D00200-00878 |
| M316F | F6N00108-00303 FB600168-00497, 499-550 |
| M316F OEM | CP500101-00135 |
| M317F | F6P00298-00678 |
| M323F | RH300181-00198 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 8 | 7X3391 | WASHER-HARD |
| 8 | 8C8992 | BOLT-HEX HEAD |
| 8 | 8T0722 | BOLT-HEX HEAD |
| 8 | 9X2125 | BOLT-HEX HEAD |
| 8 | 4360220 | BOLT-FLANGE HEAD |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
ACTION REQUIRED
Show/hide table
| Remove the existing 482-9800 Engine Mounting Group engine bracket bolts and replace with new engine bracket bolts (482-9800 Engine Mounting Group version EY, change 04). The new bolts have an incorporated sealing patch. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-36 mo |
||||||
Show/hide table
| NOTE: This is a 4.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FINAL DRIVE PLANET PIN RETAINER ON CERTAIN 120M AND 140M MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FINAL DRIVE PLANET PIN RETAINER ON CERTAIN 120M AND 140M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR APPLYING SILICONE LUBRICANT TO THE ALTERNATE EXIT WINDOW SEALS ON CERTAIN AD30, AD45B, AND AD60 UNDERGROUND ARTICULATED TRUCKS; AND ON CERTAIN R1300G, R1600H, R1700G, R1700K, R2900G, AND R3000H LOAD HAUL DUMP MACHINES PRODUCT IMPROVEMENT PROGRAM FOR APPLYING SILICONE LUBRICANT TO THE ALTERNATE EXIT WINDOW SEALS ON CERTAIN AD30, AD45B, AND AD60 UNDERGROUND ARTICULATED TRUCKS; AND ON CERTAIN R1300G, R1600H, R1700G, R1700K, R2900G, AND R3000H LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OIL DIPSTICK BRACKET ON CERTAIN 559D, 579D, 2384D, AND 2484D KNUCKLEBOOM LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OIL DIPSTICK BRACKET ON CERTAIN 559D, 579D, 2384D, AND 2484D KNUCKLEBOOM LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING EXISTING REAR RIMS ON CERTAIN 14L MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPLACING EXISTING REAR RIMS ON CERTAIN 14L MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING ADJUSTMENT STRUT ON CERTAIN CUV82 AND CUV102D UTILITY VEHICLES PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING ADJUSTMENT STRUT ON CERTAIN CUV82 AND CUV102D UTILITY VEHICLES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 2630034 AND 3478748 ROCKER ARM ASSEBMLIES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING WATER FERRULES ON CERTAIN 10R7929 3524 REMAN ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING WATER FERRULES ON CERTAIN 10R7929 3524 REMAN ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HOOD HINGE BRACKET, OR REPLACING THE HOOD, ON CERTAIN TL1055D, TL1255D, TL642D, TL943D, AND TH514D TELEHANDLERS PRODUCT SUPPORT PROGRAM FOR INSTALLING A HOOD HINGE BRACKET, OR REPLACING THE HOOD, ON CERTAIN TL1055D, TL1255D, TL642D, TL943D, AND TH514D TELEHANDLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC PUMP SIGNAL LINES ON CERTAIN 120K, 120K2, 12K, 140K, 140K2, 160K MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC PUMP SIGNAL LINES ON CERTAIN 120K, 120K2, 12K, 140K, 140K2, 160K MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE TRANSMISSION HOSE ROUTING ON CERTAIN 994K WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE TRANSMISSION HOSE ROUTING ON CERTAIN 994K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE COMPONENT FRONT FRAME WELDS ON CERTAIN 773E OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REWORKING THE COMPONENT FRONT FRAME WELDS ON CERTAIN 773E OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR PUMP DRIVE 483-2035 UPPER IDLER SHAFT BOLT ON CERTAIN 994K WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR PUMP DRIVE 483-2035 UPPER IDLER SHAFT BOLT ON CERTAIN 994K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ENGINE SOFTWARE AND DIESEL PARTICULATE FILTER ON CERTAIN C3.4B INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE ENGINE SOFTWARE AND DIESEL PARTICULATE FILTER ON CERTAIN C3.4B INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INTERMEDIATE SPEED SENSORS ON CERTAIN 745 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE INTERMEDIATE SPEED SENSORS ON CERTAIN 745 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 4996329 BOLTS ON CERTAIN AP300D, AP300F, AND AP355F ASPHALT PAVERS EQUIPPED WITH SE34V, SE34VT, OR AS4173 SCREEDS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 4996329 BOLTS ON CERTAIN AP300D, AP300F, AND AP355F ASPHALT PAVERS EQUIPPED WITH SE34V, SE34VT, OR AS4173 SCREEDS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND POSSIBLY REPLACING THE DEF MANIFOLD ON CERTAIN C4.4 INDUSTRIAL ENGINES, XQ115, AND XQ125 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND POSSIBLY REPLACING THE DEF MANIFOLD ON CERTAIN C4.4 INDUSTRIAL ENGINES, XQ115, AND XQ125 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND POSSIBLY REPLACING THE DEF MANIFOLD ON CERTAIN CB13, CB15, CB16, CB64B, CB66B, AND CB68B VIBRATORY ASPHALT COMPACTORS PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND POSSIBLY REPLACING THE DEF MANIFOLD ON CERTAIN CB13, CB15, CB16, CB64B, CB66B, AND CB68B VIBRATORY ASPHALT COMPACTORS
RODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND POSSIBLY REPLACING THE DEF MANIFOLD ON CERTAIN 2384D, 2484D, 559D, AND 579D KNUCKLEBOOM LOADERS RODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND POSSIBLY REPLACING THE DEF MANIFOLD ON CERTAIN 2384D, 2484D, 559D, AND 579D KNUCKLEBOOM LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND POSSIBLY REPLACING THE DEF MANIFOLD ON CERTAIN 320, 320F, 323F, AND 325F EXCAVATORS PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND POSSIBLY REPLACING THE DEF MANIFOLD ON CERTAIN 320, 320F, 323F, AND 325F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND POSSIBLY REPLACING THE DEF MANIFOLD ON CERTAIN AP500F, AP555F, AP600F, AND AP655F ASPHALT PAVERS, AND CW34 PNEUMATIC COMPACTORS PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND POSSIBLY REPLACING THE DEF MANIFOLD ON CERTAIN AP500F, AP555F, AP600F, AND AP655F ASPHALT PAVERS, AND CW34 PNEUMATIC COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND POSSIBLY REPLACING THE DEF MANIFOLD ON CERTAIN CCS9 COMBINATION COMPACTORS, CP54B, CP56B, CP68B, CP74B, CS54B, CS56B, CS64B, CS66B, CS68B, CS74B, CS76B, AND CS78B VIBRATORY SOIL COMPACTORS PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND POSSIBLY REPLACING THE DEF MANIFOLD ON CERTAIN CCS9 COMBINATION COMPACTORS, CP54B, CP56B, CP68B, CP74B, CS54B, CS56B, CS64B, CS66B, CS68B, CS74B, CS76B, AND CS78B VIBRATORY SOIL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND POSSIBLY REPLACING THE DEF MANIFOLD ON CERTAIN 416F 2, 420F 2, 428F 2, 430F 2, 432F 2, 434F 2, 440, 444 F 2, AND 450 BACKHOE LOADERS PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND POSSIBLY REPLACING THE DEF MANIFOLD ON CERTAIN 416F 2, 420F 2, 428F 2, 430F 2, 432F 2, 434F 2, 440, 444 F 2, AND 450 BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND POSSIBLY REPLACING THE DEF MANIFOLD ON CERTAIN TH357D, TL1055D, AND TL1255D TELEHANDLERS PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND POSSIBLY REPLACING THE DEF MANIFOLD ON CERTAIN TH357D, TL1055D, AND TL1255D TELEHANDLERS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND POSSIBLY REPLACING THE DEF MANIFOLD ON CERTAIN M314F, M315F, M316F, AND M317F WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE AND POSSIBLY REPLACING THE DEF MANIFOLD ON CERTAIN M314F, M315F, M316F, AND M317F WHEELED EXCAVATORS