After Failure Only
| PRODUCT SUPPORT PROGRAM FOR REPLACING THE 4996329 BOLTS ON CERTAIN AP300D, AP300F, AND AP355F ASPHALT PAVERS EQUIPPED WITH SE34V, SE34VT, OR AS4173 SCREEDS |
6640
|
PS53911 |
NOTE: |
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
|
NOTE: |
This Program can only be administered after a failure occurs.
The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS53911" as the Part Number
and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
The existing 4996329 Bolts can fail on certain AP300D, AP300F, and AP355F Asphalt Pavers equipped with SE34V, SE34VT, or AS4173 Screeds. If one of these angle of attach adjustment bolts fail it can create paving process issues. |
Qty |
Part Number |
Description |
2 |
6V7688 |
LOCKNUT |
4 |
8T4123 |
WASHER-HARD |
2 |
1444084 |
BOLT |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 4% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
|
Refer to the Service Manual if/as necessary and see Service Magazine M0100951 and Special Instruction M0100957 to replace the bolts. |
Product smu/age whichever comes first |
Caterpillar |
Dealer Suggested |
Customer Suggested |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
0-4000 hrs, 0-36 mo |
100.0% |
100.0% |
0.0% |
0.0% |
0.0% |
0.0% |
NOTE: This is a 1.0-hour job
|
|
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
|
|
|