Before/After
| PRODUCT IMPROVEMENT PROGRAM FOR APPLYING SILICONE LUBRICANT TO THE ALTERNATE EXIT WINDOW SEALS ON CERTAIN AD30, AD45B, AND AD60 UNDERGROUND ARTICULATED TRUCKS; AND ON CERTAIN R1300G, R1600H, R1700G, R1700K, R2900G, AND R3000H LOAD HAUL DUMP MACHINES |
7310
|
PS46072 |
NOTE: |
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
|
NOTE: |
This Program must be administered either before or after failure.
In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS46072" as the Part Number
and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code.
If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
During inspection of the Cab Alternate Exit, it has been found that the glass may be hard to remove on certain AD30, AD45B, and AD60 Underground Articulated Trucks; and on certain R1300G, R1600H, R1700G, R1700K, R2900G, and R3000H Load Haul Dump Machines. This may be due to the incorrect lube being used on the seals. |
No parts needed for this program |
Please follow SEBU9952 "Alternate Exit" inspect and replace for re-lube of the rubber on alternate exits window. |
Product smu/age whichever comes first |
Caterpillar |
Dealer Suggested |
Customer Suggested |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
0-1000 hrs, 0-12 mo |
100.0% |
100.0% |
0.0% |
0.0% |
0.0% |
0.0% |
NOTE: This is a 1.5-hour job
|
|
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
|
|
|